Annular Cutter 1-1/8 in Diameter 2 in Cutting Depth - Durable HSS

In this review the S&F STEAD & FAST annular cutter earns attention from metalworkers who need a precise, burr-free hole quickly. The biggest reason to buy is its CNC-machined M2AL high speed steel cutting edge that aims to deliver clean reamed holes and a longer service life than generic bits. It ships in a sturdy plastic case with a pilot pin and fits most magnetic drilling rigs, making it a practical choice for jobsite use where consistent hole quality and compatibility matter.

Key Features

• M2AL HSS construction: provides wear resistance and durability so the cutter can handle repeated steel cuts with reduced dulling compared with lower grade materials.
• 2 in cutting depth: allows drilling through moderately thick metal in a single pass, reducing the need for multiple operations or beginning a reamer step.
• 1-1/8 in outside diameter: produces standard-size holes suitable for many fabrication and structural fastener needs without excessive material removal.
• 3/4 in Weldon shank with two flats: ensures secure clamping in magnetic drill arbors and minimizes slippage during high-torque cuts.
• CNC-machined edge finish: yields smooth, reamed, burr-free hole walls that reduce cleanup and improve hole accuracy for bolts or dowels.
• Broad mag-drill compatibility: works with popular mag drill brands so users can swap into existing rigs without changing the machine.

Who It's For

This cutter is well suited to fabricators, maintenance technicians, and contractors who use magnetic drill presses to punch clean holes in structural steel, plate, and channel. It particularly fits users who value a precise, burr-free finish and who already own a compatible mag drill such as Alfra, BDS, Dewalt, Fein, Euroboor, Hougen, or Ruko.

Less suitable for hobbyists who only occasionally drill light material, or for anyone planning to use this bit in a standard drill press without obtaining the correct annular cutter arbor first, since the arbor required for a 2 in cutting depth is not included.

Pros & Cons

Pros

• Hard M2AL HSS material for improved wear resistance and longer service life under normal use.
• CNC-machined cutting face and reamed finish produce cleaner holes with minimal burrs.
• Weldon 3/4 in shank with flats offers secure clamping in mag drill arbors for consistent cuts.
• Includes pilot pin and sturdy plastic case for storage and alignment on the mag drill.

Cons

• Sharpness and longevity are mixed in user experience; some users report the cutter stops biting sooner than expected under heavy use.
• An arbor for use in a drill press is not included, so additional purchase is required for non-mag-drill setups.

Specifications

Brand	S&F STEAD & FAST
Material	M2AL high speed steel (HSS)
Outside diameter	1-1/8 in
Cutting depth	2 in
Shank	3/4 in Weldon shank with 2 flats
Includes	One annular cutter, one pilot pin, plastic case
Compatibility	Fits most mag drills (Alfra, BDS, Dewalt, Fein, Euroboor, Hougen, Ruko)

Our Verdict

The S&F STEAD & FAST 1-1/8 in annular cutter is a practical choice for professionals who need clean, accurate holes from a magnetic drill. Its CNC finish and HSS construction offer real value, especially when paired with the right mag drill and proper cutting technique. Buyers should accept that edge life varies with use and that an arbor is required for drill press application, but for routine metalwork it represents a solid, cost-effective tool.

Frequently Asked Questions

Will this fit my mag drill?
Yes, it is compatible with most mag drills that accept a 3/4 in Weldon shank; check your arbor spec to confirm.

Is an arbor included for drill press use?
No, an additional annular cutter arbor is required for use on a drill press and is not included in the pack.

What maintenance helps prolong life?
Use steady pressure, proper cutting speed and lubrication, and sharpen or replace when the cutter stops cutting cleanly to extend service life.