ARANA ST360M150 36in 150Lb Gas Struts Set of 2 - Heavy Lid Lift

In this review of the ARANA ST360M150 36in gas struts set, the bottom line is simple: these are for anyone replacing long, heavy lift supports where a precise extended length and strong force matter. The reviewer found the pair most valuable for heavy trap doors, tonneau covers and RV awnings that require a 36in center-to-center length and roughly 150 lb of lift per strut. Installers should be prepared for a snug fit during compression, but the payoff is a stout, direct-replacement support designed to match OEM numbers and handle lids in the 130-165 lb range.

Key Features

• Direct replacement compatibility: Matches OEM numbers ST360M150, ST360M115010 and ST360M1150S10 so you can swap in with existing brackets when the specs match.
• Accurate lengths: Extended center-to-center length of 36.0in and compressed length of 20.31in give predictable travel for long-side lids and doors.
• High force per strut: Each strut provides 668N/150 lb of force, offering strong lift for heavy lids and improving opening and holding performance.
• Pair configuration: Sold as a set of two so both sides of a lid receive matched support and consistent operation without mismatched stiffness.
• Multi-scenario use: Sized and rated for applications such as camper shells, tonneau covers, snowmobile trailer doors and RV awnings when lid weight and side length fall within the recommended range.

Who It's For

This set is aimed at DIYers, mechanics and owners replacing long gas struts on heavy lids where the extended 36.0in dimension and 150 lb lift are required. It suits people who can measure lid weight or verify OEM numbers before ordering and who need a stout pair that will hold larger doors or awnings open reliably.

It is less suitable for light lids, compact hatches or users unwilling to verify weight and fit; if the lid is under about 130 lb or the side length is much shorter than 60in, a lower-force or shorter strut would be more appropriate.

Pros & Cons

Pros

• Strong 150 lb force per strut provides solid lift and holding power for heavy lids.
• Accurate, long extended and compressed lengths make it a reliable direct replacement when OEM numbers match.
• Comes in matched pairs so both sides operate evenly and reduce binding or uneven wear.
• Versatile for multiple applications including RV awnings, tonneau covers and trailer doors.

Cons

• Installation can be snug and removal difficult for some users; one reported broken end piece during install suggests care and proper tools are needed.
• Durability concerns were mentioned by a few customers, so expect to contact support if fit or longevity issues arise.

Specifications

Brand	ARANA
Model / OEM compatibility	ST360M150, ST360M115010, ST360M1150S10
Extended length (center-to-center)	36.0in (914 mm)
Compressed length (center-to-center)	20.31in (515 mm)
Force per strut	668N / 150 lb
Quantity	2 struts per pair
Recommended lid weight	Approximately 130-165 lb; side length ~60in

Our Verdict

The ARANA ST360M150 36in gas strut pair is a practical, cost-effective choice for owners replacing long lift supports on heavy lids who verify OEM numbers and lid weight beforehand. It offers dependable lift and matching lengths that make it a sensible value for camper shells, tonneau covers and similar heavy applications, though installers should take care during fitment and be ready to use support if an end fitting issue appears.

Frequently Asked Questions

Will these fit my SNUGTOP or other tonneau cover?
They can be a direct fit if your OEM number matches one of the listed codes or if your required center-to-center extended length is 36.0in and the lift force suits the lid weight.

What lid weight are these suitable for?
ARANA recommends these for lids roughly between 130 and 165 lb; measure the lid or check the OEM part number before ordering.

Is installation difficult?
Installation is straightforward for many, but compression can be snug and some users reported removal or end piece issues, so proper tools and care are advised; ARANA offers support and replacement assistance.