BIQU CryoGrip Pro Frostbite Cold Build Plate 235x235mm - Room Temp

In this review the BIQU CryoGrip Pro Frostbite build plate is judged as a practical upgrade for users who want reliable first-layer adhesion without high bed temperatures. It is aimed at hobbyists and small-shop operators who print PLA and PETG and want to save energy while avoiding warping. The single biggest reason to buy is its room temperature cold-printing capability that delivers strong adhesion at low bed temps, reducing failed prints and lowering power draw compared with traditional heated PEI plates.

Key Features

• Room temperature cold printing: The seven-layer polymer construction enables firm adhesion for PLA at roughly 30-50C and PETG at 50-70C so many prints can run with minimal bed heat.
• Warp-free results: The Frostbite surface holds parts flat and helps prevent edge lifting and warping, particularly on open-frame models like the Ender series.
• Energy saving: Cold printing cuts bed power use and can save roughly half the energy compared to continuously heated PEI plates during long prints.
• Wide compatibility: The 235x235mm plate fits a broad range of popular printers with a 220x220 mm build volume, simplifying upgrades across several models.
• Easy maintenance: The surface cleans with only water and soap and a simple wipe typically restores adhesion thanks to a self-recovering coating.
• Reduced filament issues: Printing at lower bed temperatures helps avoid filament softening or slipping in the extruder under high chamber heat.

Who It's For

The CryoGrip Pro is best for PLA and PETG users who want strong first-layer adhesion without relying on high bed temperatures, including makers running open-frame machines and those seeking lower electricity use. It also suits anyone who frequently fights with warping, as the plate is designed to deliver reliable stick during cooling.

It may be less suitable for users who routinely print exotic high-temperature materials or need a fully heated build environment for specific engineering filaments. Some buyers concerned about long-term surface durability should weigh mixed customer reports on coating wear before committing.

Pros & Cons

Pros

• Exceptional first-layer adhesion for PLA and PETG without glue, reducing failed prints.
• Allows printing at lower bed temperatures, cutting energy consumption significantly.
• Easy to clean with water and soap and restores adhesion with simple maintenance.
• Compatible size and fit for many common desktop models, easing upgrades.

Cons

• Reports on durability are mixed; some users have seen coating wear or peeling after extended use.
• Not intended for very high-temperature specialty filaments that require a hot chamber or extreme bed temps.

Specifications

Our Verdict

The BIQU CryoGrip Pro Frostbite is a smart value for users who prioritize reliable PLA and PETG adhesion, energy savings, and ease of use. It delivers consistent first layers at much lower bed temperatures and fits many popular desktops. Buyers should accept that surface longevity varies with usage, but for most hobbyists and small shops it is a worthwhile upgrade that reduces failed prints and operating costs.

Frequently Asked Questions

Can I use this plate without any glue?
Yes, the Frostbite surface is designed to provide firm adhesion for PLA and PETG so glue is generally unnecessary.

How do I clean the surface?
Clean with water and mild soap; do not use solvents like alcohol because they can damage the coating.

Will it work on my Ender or Kobra machine?
The 235x235mm plate is listed as compatible with a wide range of Ender, Kobra, K1 and Neptune models with a 220x220 mm build area, but check your printer mounting and tolerances before purchase.