BIQU E3D Panda Revo Hotend Compatible with Bambu P1S P1P - Fast High

In this review of the BIQU E3D Panda Revo hotend, the bottom line is simple: it is for owners of Bambu Lab P1S and P1P printers who want a fast, serviceable upgrade that leverages the E3D Revo nozzle ecosystem. The Panda Revo stands out because it makes nozzle swaps trivial with a 30 second rapid change process and delivers substantially higher flow when paired with a 0.4mm Revo HF nozzle and the supplied 60W heatercore. For users chasing higher-speed prints or easier maintenance, this hotend addresses both with a familiar Revo workflow.

Key Features

• Revo compatibility: Integrates the E3D RapidChange Revo ecosystem so users can choose from nearly all Revo nozzles for different flow and resolution needs.
• Quick change nozzle: Enables tool-free nozzle swaps in about 30 seconds at room temperature, reducing downtime for nozzle changes or cleaning.
• High flow capacity: With a 0.4mm Revo HF nozzle and the 60W heatercore it can reach roughly 35-40mm3/s depending on filament, suited to high-speed printing demands.
• Faster heating and safety: The included 60W Revo heatercore heats more quickly and uses a positive temperature coefficient design for safer thermal behavior.
• High temperature tolerance: Components are rated up to 300C, expanding material compatibility for common engineering filaments.
• Cost-effective maintenance: The 2-in-1 Revo nozzle design prevents leakage and means only the nozzle needs replacement if the throat is clogged or damaged.

Who It's For

The Panda Revo is best for Bambu P1S and P1P users who want an easy-to-install, higher-flow hotend that works with the broad E3D Revo nozzle lineup; it's especially useful for makers printing larger parts or running high-speed profiles. Hobbyists who value quick nozzle swaps and reduced downtime will appreciate the tool-free 30 second change and the ability to replace only the nozzle when issues arise.

It is less suitable for users who require guaranteed fit across other BIQU models, since some customers report fit issues on non-P1 series printers, and for those who have experienced severe heat creep or intermittent failures with third-party hotends; such users should proceed cautiously and test thoroughly before committing to high-speed workflows.

Pros & Cons

Pros

• Easy and fast tool-free nozzle changes save time and simplify maintenance.
• High flow capability up to about 40mm3/s when used with a 0.4mm HF nozzle and the 60W heatercore.
• High temperature resistance to 300C and a quicker heating 60W heatercore improve material flexibility.
• Compatible with most Revo nozzles so you can tailor flow and resolution without replacing the whole hotend.

Cons

• Some users report mixed fit and heat transfer behavior on non-Bambu printers, so fit and thermal performance can vary by machine.
• While generally solid, there are occasional reports of failures from customers, so careful setup and testing are advised.

Specifications

Compatibility	Bambu Lab P1S, P1P
Nozzle ecosystem	E3D RapidChange Revo (all except Revo belt nozzle)
High flow rating	Up to 35-40mm3/s (with 0.4mm Revo HF nozzle)
Heater	E3D 60W Revo heatercore
Thermistor	NTC100k
Max temperature	Up to 300C
Nozzle change time	About 30 seconds tool-free at room temperature

Our Verdict

The BIQU E3D Panda Revo hotend is a practical upgrade for Bambu P1S and P1P owners who need higher flow and easier maintenance without changing their printing ecosystem; its Revo compatibility and 60W heatercore deliver clear benefits for high-speed printing. Buyers should be aware of mixed fit and heat transfer reports on other machines and validate fit and thermal behavior on their specific printer before heavy use.

Frequently Asked Questions

Will this fit my Bambu P1S or P1P?
Yes; the Panda Revo is built for direct compatibility with Bambu Lab P1S and P1P models.

Which Revo nozzles are supported?
It supports the full E3D RapidChange Revo lineup except for the Revo belt nozzle, so most HF and standard Revo nozzles will work.

What if the hotend clogs?
The Revo 2-in-1 nozzle design reduces leakage and lets you replace only the nozzle rather than the whole hotend, making maintenance and recovery from clogs more cost-effective.