Bitcoins Miner 2.4TH/s NerdQaxe+ BTC Miner - Silent WiFi Home Use

In this review of the NerdQaxe+ Bitcoins Miner, the bottom line is simple: this compact, open-source ASIC is aimed at hobbyists and small-scale miners who want a low-noise, Wi-Fi only device with respectable hashing for its size. The reviewer found the unit useful for learning and light mining setups because it delivers around 2.4-2.5TH/s at roughly 20W per TH while using a 12V power input and an easy web-based AxeOS setup. It is not for large farms but offers a good entry point for enthusiasts who value simplicity and a micro form factor.

Key Features

• Hash rate: The device provides around 2.4-2.5TH/s, giving hobby miners a meaningful hash power for testing or small operations.
• Energy efficiency: At about 20W/TH, the design balances power draw and performance for lower running costs compared with larger rigs.
• Open-source firmware: NerdQaxe+ runs AxeOS and is fully open-source, enabling customization and transparency for advanced users.
• Wi-Fi connectivity: Built-in ESP32-S3 Wi-Fi requires a 2.4GHz connection and removes the need for an ethernet cable for easy placement.
• Onboard display: The 1.9in LCD color screen shows mining status and makes local monitoring straightforward without extra tools.
• Compact power: The unit uses a 12V 6A DC power supply via a 2.1/5.5mm barrel connector for simple home setup.

Who It's For

The NerdQaxe+ is best suited to cryptocurrency hobbyists, tinkerers, and home miners who want an accessible, low-noise ASIC to learn mining operation and firmware tweaks. Its open-source AxeOS and small footprint appeal to anyone experimenting with customization, monitoring, or low-scale continuous mining.

It is less appropriate for commercial miners or anyone needing rack-scale throughput, as the 2.4-2.5TH/s output and Wi-Fi-only connectivity are designed for convenience rather than large fleet management. Users requiring wired networking or very high hash densities should look at larger, data-center oriented equipment.

Pros & Cons

Pros

• Compact 4-chip BM1368 design gives a solid 2.4-2.5TH/s for hobby use.
• Low relative power consumption at approximately 20W per TH helps reduce operating cost.
• Open-source AxeOS and the 1.9in LCD color display make monitoring and customization straightforward.
• Wi-Fi built in with ESP32-S3 simplifies placement without cable routing.

Cons

• Wi-Fi only (2.4GHz) means no ethernet option for environments that prefer wired networks.
• Not intended for large-scale or professional mining operations due to modest total hash power.

Specifications

Our Verdict

The NerdQaxe+ is a sensible buy for hobby miners and open-source enthusiasts who want a low-noise, Wi-Fi only ASIC with a clear, editable firmware stack and handy local display. It offers reasonable hash power and efficiency for home use and is good value as an educational or light production miner, but it is not a substitute for larger, wired, production-class miners.

Frequently Asked Questions

Does this miner need a special power supply?
The unit operates from a 12V 6A DC supply using a 2.1/5.5mm barrel connector, so a compatible 12V 6A adapter is required.

Can I connect it via ethernet?
No, the device is Wi-Fi only and requires a 2.4GHz wireless network; there is no ethernet port.

Is the firmware moddable?
Yes, NerdQaxe+ uses open-source AxeOS, which allows customization and firmware adjustments for experienced users.