Cat6/6A RJ45 Pass Through Shielded Plugs - EZ Crimp 50-pack

In this review the reviewer tested the trueCABLE Cat6/6A RJ45 pass through shielded plugs to see who benefits most from them and why. The bottom line: these plugs are aimed at installers and network hobbyists who need a reliable pass through RJ45 that supports shielded cable and higher PoE power, with the single biggest reason to buy being the pass through design that lets you verify wiring and push the cable jacket fully into the plug for cleaner terminations. The review evaluates ease of use, compatibility with 23AWG conductors, and how well they perform on common testers.

Key Features

• Pass Through Design: The visible conductors protruding through the front let you confirm TIA 568A or 568B wiring before crimping, reducing miswires.
• Maximum Performance: Push-pull seating of the cable jacket minimizes crosstalk and the triple prong gold plated contacts help maintain solid signal transfer.
• Shielded with External Ground: Built-in external ground tab supports shielded F/UTP installations and allows termination of the drain wire for better EMI protection.
• Wide Compatibility: Works with 23AWG stranded or solid conductors and accepts cable jackets up to 8.00mm with conductor insulation of 1.05 - 1.25mm.
• PoE Ready: Rated to support PoE/PoE+/PoE++ including 4PPoE up to 100W, which suits modern powered network devices.
• Resealable Bag: The 50 pieces come in a resealable pack that keeps unused plugs clean and organized during projects.

Who It's For

The plugs are best for professional network installers, IT technicians, and serious hobbyists who terminate shielded Cat6 or Cat6A cables and need the ability to verify conductors before crimping. The pass through format and external ground make them a natural fit when used with proper crimp tools and a grounding strategy for shielded runs.

Those who should look elsewhere include casual users who rarely terminate cables and expect effortless crimps without practice, or buyers using unusually large or very thin conductors outside the indicated insulation range. Also, these plugs are intended for use with a compatible crimp tool that handles the external ground tab; without the right tool results may be inconsistent.

Pros & Cons

Pros

• Pass through design makes wiring verification straightforward and reduces wasted terminations.
• Triple prong gold contacts and staggered conductor design support strong electrical contact and signal integrity.
• Shielded external ground and PoE support provide compatibility with higher power and EMI-sensitive installs.
• Resealable 50-piece pack helps keep connectors organized on job sites.

Cons

• Some users report inconsistent crimp results unless using the proper EZ crimp tool and practicing technique.
• Fit can vary by cable brand; very tight jackets near the 8.00mm limit may be challenging to seat fully.

Specifications

Our Verdict

These shielded pass through RJ45 plugs deliver practical benefits for anyone terminating Cat6 or Cat6A shielded cable while supporting modern PoE power levels. They represent good value for professionals and experienced hobbyists who use the recommended crimp tool and pay attention to cable size; for occasional users there is a short learning curve but the verification advantage makes them worth considering for reliable installs.

Frequently Asked Questions

Can these plugs handle PoE devices?
Yes, they support PoE/PoE+/PoE++ including 4PPoE up to 100W when properly terminated.

Will they work with stranded and solid cable?
Yes, they are compatible with 23AWG stranded or solid conductors within the listed insulation range.

Do you need a special tool to crimp the ground tab?
Termination of the external ground tab is intended with the trueCABLE all in one V2 or a compatible crimp tool for consistent results.