Cat6 Shielded Riser Cable 1000ft - 23AWG Solid Copper, 550MHz

In this review the Elite Cat6 Shielded Riser (CMR) 1000ft cable is evaluated for installers and network builders who need a highperformance bulk run for risers, walls and floor conduits. The bottom line: this cable is aimed at professionals and serious DIYers who want the noise rejection and thermal safety of a shielded, ULLP certified Cat6 riser cable, and it delivers measurable margin over standard EIA/TIA requirements while remaining easy to deploy on a wooden reel.

Key Features

• 1000ft bulk length: A full reel provides long continuous runs without joins, reducing potential failure points in commercial or residential installs.
• 23AWG solid copper: Solid bare copper conductors maximize signal strength and consistency for gigabit and higher Ethernet links.
• Foiled overall shield (F/UTP): An overall foil shield over the four twisted pairs reduces EMI in environments with electrical noise or dense cable bundles.
• ULLP and UL listed safety: LP certification and UL listing address PoE thermal and safety concerns when powering devices with higher current.
• 550MHz performance: Rated to 550MHz with 3-5 dB margin over EIA/TIA568.2D, which gives extra headroom for stable 1Gb and shortrun multigig links.
• Marked every 2 ft: Length markings every 2 ft on the jacket simplify measuring and installation planning onsite.

Who It's For

The cable suits network installers, lowvoltage contractors and advanced home builders who need a shielded Cat6 riser cable for runs up to 328 ft (100 m) where EMI or close proximity to power wiring could be a concern. It is especially relevant when planning PoE, PoE+ or PoE++ deployments because of the ULLP certification that addresses heat and power safety.

Less technical buyers who only need a short patch cable or a simple consumer install may prefer preterminated leads or unshielded options that are lighter and easier to terminate without shielded connectors. This reel is not a dropin replacement for fieldterminated UTP hardware unless shielded terminations are used.

Pros & Cons

Pros

• Durable solid copper conductors and foil shield deliver strong, consistent signal quality for critical links.
• UL listed and ULLP certified for safer PoE operation under higher power and heat conditions.
• 550MHz headroom and Fluke tested compliance give confidence in real world performance and inspections.
• Wooden reel and 2 ft increments make long runs easy to measure and deploy.

Cons

• Shielded cable requires compatible shielded connectors and grounding, which adds a small extra step compared with unshielded Cat6.
• The cable is heavier and less flexible than patch cables, making tight bends and neat cable management more challenging in some installs.

Specifications

Product type	Cat6 Shielded Riser (CMR) bulk cable
Length	1000 ft
Conductor	23AWG 100% solid bare copper
Shielding	Overall foil shield over 4 unshielded twisted pairs (F/UTP)
Frequency	550 MHz
Max run	328 ft (100 m) for 1Gb performance
Certifications	UL listed, ULLP certified, ETL verified, RoHS and TAA compliant

Our Verdict

The Elite Cat6 Shielded Riser 1000ft reel is a solid choice for pros who need a certified, shielded Cat6 riser cable with thermal safety for PoE. It balances durable 23AWG solid copper conductors, measurable performance margin and industry certifications, making it a good value for installations that demand EMI protection and reliable long runs.

Frequently Asked Questions

Can this cable be used for PoE devices?
Yes. It is suitable for PoE, PoE+ and PoE++ and has ULLP certification to address higher power and heat during PoE operation.

How far can I run this cable for gigabit Ethernet?
Run this Cat6 cable up to 328 ft (100 m) for 1Gb performance; shorter runs can achieve multigig speeds per IEEE 802.3bz.

Do I need special connectors for the shield?
Yes. Use shielded keystone jacks or shielded RJ45 field termination plugs and ensure proper grounding for the overall foil shield.