COB LED Strip Lights 65.6ft AC 110V 120V Daylight 6000K - Bright

In this review the ALITOVE 65.6ft COB LED Strip is examined for homeowners and light planners who need a long, high-density daylight strip without an external power supply. The standout reason to consider it is the continuous 20m length of COB LEDs that delivers a very even, bright 6000K light suitable for patios, gardens, pool coves and long indoor runs. The kit arrives with a plug, remote and mounting hardware so the main setup steps are straightforward for a DIY installer willing to follow the safety notes.

Key Features

• All-in-one AC kit: The strip operates on AC 110V~130V with a plug and rectifier built in, so no separate power supply is required and installation is simpler for long runs.
• High density COB light: With 288 LEDs per meter (5760 LEDs over 20m) the strip produces a soft, uniform glow with reduced dark spots compared with standard SMD strips.
• IP67 waterproofing: The silicone-sealed construction protects the strip from rain and splashes, making it suitable for patios, terraces and pool surrounds when not submerged long-term.
• Integrated remote dimming: The included RF remote and controller let you set brightness from 10-100% and change modes while saving your preferred setting.
• Flexible and cuttable: The strip bends freely and can be cut every 50 cm along marking points, allowing tailored lengths without soldering using the provided connection pins.
• Complete mounting kit: The package includes 95 mounting buckles, screws, end caps and connecting pins so a continuous 20m run is supported from unboxing to fastening.

Who It's For

The strip is ideal for homeowners, landscapers and small commercial projects that need a long, high-output cold white strip and prefer not to deal with separate transformers. It suits continuous runs along eaves, ceilings, corridors or poolside coves where uniform 6000K light is desired.

It may be less suitable for buyers needing color-changing RGB effects or for installations that require permanent underwater submersion, since the product is IP67-rated and the manufacturer warns against long-term immersion. Those who need plug-and-play simplicity but want warm white tones should look elsewhere.

Pros & Cons

Pros

• Very even, bright cold white light from a high-density COB array for runs up to 20m.
• Plug-in AC operation and included remote remove the hassle of sourcing a separate power supply.
• Comprehensive mounting kit and cuttable design speed installation without soldering for most layouts.
• IP67 sealing lets the strip be used outdoors where occasional wetting occurs.

Cons

• Some users report slight flicker under certain conditions, so sensitive applications may require testing before final installation.
• Not intended for continuous underwater use; avoid leaving the strip submerged for long periods.

Specifications

Product name	20m COB LED Strip with AC 110V~130V input
Length	20 m (65.6 ft)
LED density	288 LEDs/m, 5760 LEDs total
Color temperature	6000K (cold white)
Waterproof rating	IP67, silicone sealed
Dimmable	10-100% with included RF remote
Kit contents	Strip, RF remote, 95 buckles, 95 screws, 2 end caps, 2 pins, 2 m power cord

Our Verdict

The ALITOVE 65.6ft COB LED strip is a practical choice for projects that need a long, consistent cold white illumination without a separate power supply. It offers excellent value for outdoor and indoor accent lighting thanks to its high LED density, plug-in convenience and complete mounting kit; anyone planning sensitive installations should check for flicker and avoid prolonged underwater use.

Frequently Asked Questions

Can this run directly from a standard wall outlet?
Yes, the kit includes a plug and rectifier for AC 110V~130V input so no extra power supply is needed.

Is it safe to use near a pool?
The strip is IP67 sealed for splashes and wet locations, but it should not be left submerged for long periods and follow the safety guidance provided.

Can the strip be cut to fit a shorter run?
Yes, it is cuttable every 50 cm along marked points and includes connecting pins to rejoin segments without soldering.