CONFAST 3/4ft x 10ft Wedge Anchor Zinc Plated (Box of 10) - Durable

In this review the CONFAST 3/4' x 10' Wedge Anchor (box of 10) is evaluated for tradespeople and DIYers who need a reliable concrete fastener; the bottom line is that it is a straightforward, heavy-duty anchor best for applications that demand solid hold in dry concrete. The reviewer found the anchors easy to use because the hole size matches the anchor size, and appreciates that each anchor ships complete with nuts and washers for fast, no-fuss installation.

Key Features

• Zinc plated: Provides corrosion resistance appropriate for dry environments so anchors hold up where moisture is not present.
• Complete package: Each anchor comes packaged with nuts and washers, allowing immediate assembly without searching for additional hardware.
• Matched hole size: The anchor requires a 3/4' hole, which simplifies layout and reduces measurement errors during installation.
• Wide size range: Available in larger dimensions like 3/4' x 10' to suit heavy-duty applications, ensuring the right fastener for the job.
• Carbon steel construction: Offers the strength needed for demanding uses such as lifts and structural attachments to concrete.

Who It's For

The CONFAST wedge anchor is ideal for mechanics, contractors and fabricators who mount heavy equipment to concrete, including 2-post and 4-post vehicle lifts, machinery bases, and structural brackets. Its long 10' length and 3/4' diameter make it suited to applications requiring deep embedment and high pullout resistance.

It is not intended for use in block, brick or hollow base materials, and users who need anchors for wet or highly corrosive environments should consider stainless or specialty coatings instead of this zinc plated option.

Pros & Cons

Pros

• Well-made carbon steel body with zinc plating offers good durability in dry settings.
• Includes nuts and washers for quick, complete installation right out of the box.
• Simple sizing rule (hole diameter equals anchor diameter) reduces installation mistakes.
• Long 10' length and 4' of thread give flexibility for thick base plates and heavy fixtures.

Cons

• Not suitable for block or brick base materials and should be avoided in wet environments where zinc may corrode faster.
• Some customers reported occasional wedges that did not grip perfectly, so careful installation and inspection are recommended.

Specifications

Brand	CONFAST
Material	Carbon steel, zinc plated
Anchor diameter	3/4'
Anchor length	10'
Thread length	4'
Required hole diameter	3/4'
Minimum embedment	3-1/4'

Our Verdict

The CONFAST 3/4' x 10' wedge anchor is a practical, cost-effective choice for securing heavy equipment to concrete when used in dry conditions. It delivers strong holding power, arrives with nuts and washers for quick assembly, and is good value for professionals who need dependable concrete anchors; however, it is not the right choice for masonry or wet environments.

Frequently Asked Questions

Can this anchor be used in brick or block?
No. The anchor is designed for use in concrete only and should not be installed in block or brick base material.

What size drill bit is required?
Drill a 3/4' hole with a carbide tipped bit rated for use in concrete and a hammer drill, matching the hole diameter to the anchor size.

Is this anchor corrosion resistant?
The zinc plating helps prevent rust in dry environments, but it is not intended for prolonged exposure to moisture or corrosive conditions.