Cudy 24 Gigabit Ethernet PoE+ Switch GS1028PS2 - 300W Power

In this review of the Cudy 24 Gigabit Ethernet Unmanaged PoE+ Switch GS1028PS2 the bottom line is clear: this is a practical workhorse for small to medium surveillance and network deployments that need reliable PoE power and simple setup. The switch delivers a full 24 GbE PoE+ ports with a 300W total power budget and two SFP uplinks, and it stands out for power resiliency features like PD Detect, PD Alive watchdog and port power prioritization. For installers who want plug-and-play PoE with CCTV-friendly options, this switch answers the essentials without complicated management.

Key Features

• 24 GbE PoE+ ports: Provides power and gigabit data to up to 24 devices from a single chassis, reducing separate power supplies for cameras and APs.
• 300W total power budget: Supports up to 32W on a single port when needed and reserves enough capacity to feed multiple IEEE 802.3af/at devices.
• 2 Gigabit SFP uplinks: Offers flexible fiber or long-distance uplink options to integrate the switch into larger networks without sacrificing throughput.
• CCTV and VLAN one-key mode: CCTV mode extends power and data to 250m for distant cameras and VLAN isolates PoE ports to reduce local network interference.
• PD Detect and PD Alive: Automatic device detection and watchdog restart help maintain uptime for critical powered devices like IP cameras.
• Desktop or 19-in rackmount: Metal chassis includes mounting hardware so the same unit fits a rack or a shelf in a wiring closet.

Who It's For

The Cudy GS1028PS2 is best for small security installers, IT staff in small businesses, or system integrators who need a cost-effective, unmanaged PoE+ solution that can power multiple cameras or access points without per-port configuration. Its long-distance CCTV feed option is useful where power outlets are absent and cameras must be powered over cable.

This is not aimed at administrators who require Layer 3 routing, advanced switch management, or per-port monitoring through a GUI. If you need complex VLAN tagging, QoS policies, SNMP monitoring, or cloud management, a managed switch would be more appropriate.

Pros & Cons

Pros

• High power capacity and per-port 32W support make it reliable for heavy PoE+ device mixes.
• PD Detect and PD Alive watchdog increase uptime for remote cameras and reduce manual reboots.
• CCTV mode and 2 SFP ports give installers practical flexibility for long runs and uplinks.

Cons

• Unmanaged design means no advanced configuration or monitoring for enterprises that require it.
• At 24 ports and 300W, it requires careful power planning in dense PoE deployments to avoid exceeding the budget.

Specifications

Our Verdict

The Cudy GS1028PS2 is a solid, no-frills PoE+ switch that delivers the essential power and reliability features needed for multi-camera and wireless deployments. It offers good value for installers who need a high-capacity, plug-and-play switch with watchdog recovery and long-distance CCTV support, though enterprises wanting deep management should consider a managed alternative.

Frequently Asked Questions

Can this switch power high-draw PoE+ cameras?
Yes, the switch supports IEEE 802.3af/at and up to 32W on a single port, with a 300W total budget to feed multiple devices.

Does it support fiber uplinks?
Yes, it includes two Gigabit SFP ports for fiber or long-distance uplink connections.

What happens if a connected camera stops responding?
The PD Alive watchdog can detect unresponsive PDs and restart PoE power to reactivate the device automatically.