DIN Rail PS 15V 6.5A 97.5W DR-100-15 - Compact DIN Rail Power

In this review of the DIN Rail PS 97.5W 15V 6.5A DR-100-15 the reviewer finds a compact, single-output AC-DC switching supply aimed at installers and hobbyists who need dependable low-voltage power on a DIN rail. The bottom line: this unit is for projects that require a stable 15V at up to 6.5A in a narrow package, and it stands out because it provides a full 97.5W output in a standard DIN-rail form factor suitable for control panels and small industrial systems.

Key Features

• Single 15V output: Supplies a consistent 15V rail ideal for sensors, controllers, and small electronics that need moderate current without multiple outputs.
• 97.5W rated power: Delivers up to 97.5W so it can run several peripherals or a single higher-current device without voltage sag under normal load.
• 6.5A maximum current: Provides a useful 6.5A headroom for short-duration peaks and steady loads common in automation and lab setups.
• DIN-rail mounting: The rail-mounted design saves panel space and makes installation straightforward in electrical cabinets and equipment racks.
• AC-DC switching design: Offers efficient conversion from mains AC to low-voltage DC, helping to reduce heat and improve operating efficiency compared with older linear supplies.

Who It's For

This power supply is best for technicians, system integrators, and makers who need a reliable 15V DC source inside a control cabinet or test bench. Its power and current ratings match typical industrial sensors, small PLCs, communication modules, and LED drivers that run at 15V.

It is not intended for users who need multiple voltage rails, ultra-low noise laboratory supplies, or extremely compact bench adapters; those users should look for multi-output or linear bench supplies instead.

Pros & Cons

Pros

• Compact DIN-rail form makes mounting and wiring neat and repeatable in panel installations.
• Full 97.5W output at 15V gives solid headroom for peripherals and short current spikes.
• 6.5A continuous current supports moderate loads commonly found in automation tasks.

Cons

• Single-output design means no built-in secondary voltages for systems that need multiple rails.

Specifications

Brand	EverSale
Model series	DR-100 Series
Output voltage	15V DC
Output current	6.5A
Rated power	97.5W
Mounting	DIN-rail
Connector	6-pin

Our Verdict

The DR-100-15 is a practical, no-frills DIN-rail switching supply that delivers a reliable 15V 6.5A source at near-100W power in a compact package. It is good value for installers who need a stable single-output rail for control panels and small industrial equipment, but those needing multiple voltages or precision bench control should consider alternate supplies.

Frequently Asked Questions

Can this power a PLC or controller that needs 15V?
Yes, the unit provides a steady 15V DC output at up to 6.5A which is suitable for many PLCs and controllers within that current envelope.

Is it easy to mount and wire in a control cabinet?
Yes, the DIN-rail form factor and 6-pin connector make installation and neat wiring straightforward for electricians and technicians.

Does it provide multiple outputs or adjustable voltage?
No, this is a single-output 15V fixed supply, so multi-rail applications will require additional supplies or a different model.