Skip to product information
1 of 1

DNA Motoring ZTL-25RAW 2.5 in Exhaust Bend Kit - DIY Mandrel Bend

DNA Motoring ZTL-25RAW 2.5 in Exhaust Bend Kit - DIY Mandrel Bend

Regular price $169.09 USD

Price subject to change. Tap below for current.

In this review the DNA Motoring ZTL-25RAW kit is evaluated as a DIY-friendly exhaust tubing set aimed at hobby fabricators and small shop mechanics who need a complete, universal piping assortment. The standout reason to buy is the kit's combination of computerized mandrel bends and a full complement of slip fit pieces that let a user lay out and weld a custom exhaust without sourcing individual sections. It performs best where flexibility and bend accuracy matter more than corrosion resistance out of the box.

Key Features

  • 18-gauge walls: Provides a predictable balance of weight and weldability for TIG or MIG work, allowing fabricators to join sections without excessive heat distortion.
  • 2.5 in inlet/outlet: A common diameter for many performance exhaust builds that supports good flow while staying manageable for routing on most vehicles.
  • Slip fit joints: Designed for straightforward mockup and tack welding so installers can accurately locate bends before final welding.
  • Complete pipe set: Four 48 in straight pieces plus 4x 90, 4x 45 and 4x 180 degree U-bends give enough tubing to fabricate multiple routing options or even two small systems.
  • Mandrel-bent geometry: Computerized mandrel bends help maintain smooth internal radii to reduce turbulence and maintain exhaust flow compared with crude bends.

Who It's For

This kit is for DIY mechanics, home fabrication enthusiasts and small shops that need a universal, ready-to-use piping selection to build or repair an exhaust system. It fits projects where custom routing or multiple bends are required and where the installer plans to cut, fit and weld the system themselves.

Those who need pre-coated or stainless components, or who require long-term corrosion resistance without surface prep, should look elsewhere, since the kit is mild steel and some buyers report surface rust on arrival unless treated or painted after fitting.

Pros & Cons

Pros

  • Well matched bends and dimensions make mockup and welding straightforward for fabricators.
  • Good value: the quantity and variety of pieces let users complete large sections without extra ordering.
  • Mandrel bends preserve internal diameter through curves to help maintain smoother exhaust flow.
  • Material and weld quality are generally praised by customers when properly prepared and welded.

Cons

  • Made of mild steel; some customers report thinness or surface rust on arrival, so post-purchase rust prevention is recommended.
  • 18-gauge may be considered thin by users wanting heavier gauge or stainless construction for longevity.

Specifications

Material High quality mild steel
Wall thickness 18-gauge
Inlet / Outlet size 2.5 in OD
Included pieces 4x 48 in straight, 4x 90 deg, 4x 45 deg, 4x 180 deg U-bends
Bend type Computerized mandrel-bends
Joint type Slip fit joints for easy fabrication

Our Verdict

The DNA Motoring ZTL-25RAW 2.5 in kit is a practical, cost-effective choice for builders who want a comprehensive set of mandrel-bent mild steel tubing to lay out and weld a custom exhaust. It delivers bend accuracy, a useful assortment of pieces, and easy slip-fit assembly, but buyers should plan to clean, coat or paint parts to prevent rust and accept that 18-gauge mild steel is lighter duty than stainless alternatives.

Frequently Asked Questions

Can this kit be welded with TIG or MIG?
Yes, customers commonly TIG or MIG weld the slip fit joints after tack fitting; the 18-gauge wall is well suited to common shop welding methods.

Is the tubing ready for installation as delivered?
The tubing is ready for mockup and welding, but because it is mild steel some sections may show surface oxidation and will benefit from cleaning and protective coating before final installation.

Will this kit fit most vehicle exhaust projects?
The 2.5 in OD diameter and variety of bends make it suitable for many universal exhaust builds, but specific fitment depends on vehicle routing and hanger positions.

Editor's Take

GearMustHave editorial rating: 4.6 out of 5. GearMustHave Editorial Rating

The DNA Motoring ZTL-25RAW 2.5 in kit is a cost-effective, comprehensive mild steel tubing set that offers accurate mandrel bends and slip-fit joints for DIY exhaust fabrication; buyers should plan to treat surfaces for rust protection.

View full details

Recently viewed