Electriduct 4 in W x 4 in H Open Slot Wire Duct - 6.56 ft Stick

In this review the Electriduct 4 in W x 4 in H open slot wire duct is evaluated for installers and DIYers who need a sturdy, heat-resistant cable raceway for medium runs. The bottom line: it is a straightforward, no-frills PVC raceway that offers a long 6.56 ft stick with pre-drilled mounting and removable covers, making routing and securing bundles of cable quick and repeatable. For anyone routing power or low-voltage wiring in utility closets, workshops, or behind equipment racks, the simplicity and temperature tolerance are the biggest reasons to choose it.

Key Features

• 4 in by 4 in opening: Provides generous internal space for multiple wires or bundled cable runs without excessive crowding.
• 6.56 ft stick length: The long single-piece stick reduces the number of joints needed and speeds installation across moderate distances.
• Pre-drilled with covers: Pre-drilled mounting holes and included covers let an installer secure the raceway quickly while keeping cables accessible for changes.
• PVC construction: Durable PVC offers corrosion resistance and an easy-to-cut material for on-site adjustments.
• Heat and flame properties: Material resists heat to 85 C and carries a UL94 V-2 flammability rating for common electrical environments.
• Wide operating temperature: Rated for normal working temperatures from -25 C to 70 C, suitable for many indoor and sheltered outdoor locations.

Who It's For

This product is aimed at electricians, facility maintenance staff, and serious DIYers who need a stiff, reliable raceway for bundling multiple conductors where visibility and access are required. The open slot style and removable covers make it practical for environments where cables may need to be added or replaced without tearing out fixed conduit.

Those who need a decorative finish, integrated cable grommets, or a flexible conduit for tight bends should look elsewhere; this PVC stick is rigid, and the ends can be jagged or sharp, so careful handling and end finishing will be necessary in visible installations or where fingers may reach.

Pros & Cons

Pros

• Long 6.56 ft stick reduces joints and speeds up runs in service areas.
• Pre-drilled base and removable covers simplify mounting and future access to cables.
• PVC body with heat resistance to 85 C and UL94 V-2 rating adds practical safety for many installations.
• Generous 4 in x 4 in interior accommodates multiple cable bundles without crowding.

Cons

• The rigid PVC ends may be jagged or sharp, requiring trimming or sanding before final installation.
• Not intended as a decorative finish, so it may need painting or additional trim in visible areas.

Specifications

Product Type	Open slot wire duct cable raceway
Size	4 in W x 4 in H
Stick Length	6.56 ft (single stick)
Material	PVC
Color	Gray
Temperature Range	-25 C to 70 C (normal working)
Heat Resistance / Flammability	Heat-resistant up to 85 C; UL94 V-2 rated material

Our Verdict

The Electriduct 4 in x 4 in open slot wire duct is a practical, value-oriented raceway for anyone who needs a durable, serviceable conduit for medium cable runs. Installers will appreciate the pre-drilled base, removable covers, and full 6.56 ft stick length, while the PVC construction and temperature ratings suit typical utility and equipment-room uses. It is best for functional installations rather than decorative finishes, but it represents good value where accessibility and heat resistance matter.

Frequently Asked Questions

Is the raceway ready to mount out of the box?
The stick is pre-drilled and ships with covers, so it can be mounted immediately though ends may need finishing.

Can this raceway handle high temperature cables?
The PVC is heat-resistant up to 85 C and rated UL94 V-2, appropriate for many power and low-voltage cables but check specific cable ratings for higher temperatures.

Are the ends smooth for finger-safe access?
Ends of the stick can be jagged or sharp, so trimming or sanding the cut ends is recommended before final installation.