EVIL ENERGY 10AN Fuel Line Kit 10ft - Durable Braided Nylon Fuel Hose

In this review of the EVIL ENERGY 10AN Fuel Line Kit, the bottom line is simple: this 10ft braided nylon fuel hose is best for hobbyists and performance-minded installers who need a flexible, pressure-rated line for fuel, oil, or transmission fluid. The reviewer found the kit most valuable for fuel pressure regulator setups and custom plumbing because of its combination of a CPE rubber inner, 304 steel wire reinforcement and a neat nylon outer braid that balances durability and appearance.

Key Features

• Size: The 10ft length with a 0.53in ID and 0.79in OD provides enough hose for many custom routing jobs without excess slack.
• Pressure ratings: With a working pressure of 625psi and a burst pressure of 1875psi, the hose handles higher-demand fuel system use safely.
• Temperature range: Rated from -22F to 248F, it tolerates cold starts and heat near the engine bay without rapid degradation.
• Construction: CPE rubber inner tube plus a 304 steel wire layer and nylon outer braid give a blend of chemical resistance and abrasion protection for long-term service.
• Compatibility: The hose is compatible with fuel, diesel, race gas, oil, transmission fluid and hydraulic fluids, making it versatile for many projects.

Who It's For

This kit is aimed at DIY mechanics, track-day teams and custom builders needing a reliable, flexible AN10 line for fuel systems, return lines or feeding a fuel pressure regulator. The 10ft length suits projects where pre-bent hard lines are impractical and where appearance matters, since the braided outer finish is clean under the hood.

Those who should look elsewhere include users who require pre-terminated hose assemblies or specific OEM fittings already installed, and buyers needing extremely high temperature ratings beyond 248F or specialized chemical compatibility not listed by the manufacturer.

Pros & Cons

Pros

• High build quality from the CPE inner and 304 steel wire layer gives confidence against abrasion and swelling.
• Generous pressure ratings make it suitable for many performance fuel and oil applications.
• 10ft length and neat black and red styling provide flexibility and a tidy install appearance.
• Customers report easy assembly and good value for money when used with compatible fittings.

Cons

• Some users report occasional issues getting certain fittings to attach properly, so expect careful fitting and clamp selection.
• It is a bulk hose kit and does not include pre-crimped ends, which adds installation time for some builders.

Specifications

Our Verdict

The EVIL ENERGY 10AN Fuel Line Kit is a practical, good-value option for anyone building or upgrading fuel and oil lines who needs a durable, flexible hose with solid pressure and temperature ratings. It is especially worthwhile for custom plumbing and regulator setups where appearance and reliability matter, though buyers should be prepared to fit their own AN hardware and double-check compatibility with their fittings.

Frequently Asked Questions

Can this hose be used for diesel?
Yes, the manufacturer lists diesel compatibility along with fuel, oil and hydraulic fluids.

Is the hose ready to install with fittings?
No, this is a bulk 10ft hose; fittings are not pre-installed and users will need appropriate AN fittings or clamps for termination.

Will it handle engine bay heat?
Yes, the hose is rated to 248F (120C), which covers typical engine bay conditions for most applications.