EVIL ENERGY 10AN Fuel Line Kit, AN10 Braided Nylon Fuel Hose - Durable

In this review of the EVIL ENERGY 10AN Fuel Line Kit the bottom line is straightforward: this 10ft AN10 braided fuel hose is best for DIY tuners and racers who need a durable, attractive line for fuel, oil or transmission fluid. The reviewer found the kit delivers reliable pressure handling and a clean black-on-black appearance, making it a strong choice when routing fuel or return lines. For anyone who needs a flexible hose rated to higher pressures and a wide temperature range, this kit stands out as a practical, value-oriented option.

Key Features

• ID and length: The 0.53in inner diameter and 10ft length provide ample reach for most engine bays and modifications without excessive coupling.
• Construction: A CPE rubber inner tube with a 304 stainless wire layer and nylon outer braid gives a balance of chemical compatibility and abrasion resistance.
• Pressure rating: With a 625psi working pressure and 1875psi burst pressure, the hose handles typical fuel and racing system pressures with margin for safety.
• Temperature tolerance: The -22F to 248F range keeps the hose stable in cold starts and high under-hood heat conditions common in performance builds.
• Compatibility: The hose works with fuel, diesel, race gas, transmission fluid, oil and hydraulic fluids, which makes it versatile for swaps and custom plumbing.
• Appearance: The black braided finish provides a low-profile look that blends into most engine bays while still looking purposeful.

Who It's For

This kit is aimed at car enthusiasts, track-day racers and anyone doing custom fuel system plumbing who needs a flexible, pressure-capable AN10 hose. It is especially useful for users building or upgrading a fuel return line, connecting a fuel pressure regulator, or rerouting fuel and oil lines where abrasion resistance is helpful.

Those who should look elsewhere are users who require pre-assembled, crimped end fittings or OEM-specific hose assemblies delivered ready to bolt on; this product is a length of hose intended for cutting and fitting with aftermarket AN fittings. Also, if you need ultra-high temperature rubber or PTFE-lined hoses for unusual fuels, a different specialist hose may be preferable.

Pros & Cons

Pros

• Durable CPE inner and 304 steel wire reinforcement give strong pressure and abrasion resistance.
• Wide temperature range and high burst pressure suit many performance and street applications.
• Good value for a 10ft length, with customers reporting solid appearance and easy assembly.
• Versatile chemical compatibility for fuel, oil, transmission fluid and more.

Cons

• Sold as hose only, so users must supply and attach compatible AN fittings and take care with proper sealing.
• Some customers reported occasional fitment difficulty with specific fittings, so careful assembly and checking for leaks is recommended.

Specifications

Inner diameter	0.53in (13.5mm)
Outer diameter	0.79in (20mm)
Length	10ft
Working pressure	625psi
Burst pressure	1875psi
Temperature range	-22F to 248F (-30C to 120C)
Construction	CPE rubber inner, 304 stainless wire layer, nylon outer braid

Our Verdict

The EVIL ENERGY 10AN Fuel Line Kit is a solid, cost-effective hose for custom fuel and fluid plumbing where flexibility, pressure capacity and a tidy black finish matter. It is best for hands-on installers who will add their own AN fittings and verify proper sealing; for those needs it represents good value and reliable performance.

Frequently Asked Questions

Can this hose be used for diesel?
Yes, the braided CPE construction and compatible materials make it suitable for diesel as well as gasoline and race gas.

Is the kit supplied with AN fittings?
No, this product is a length of AN10 hose only; users should provide compatible AN fittings and clamps for assembly.

Will it handle high under-hood heat?
The hose is rated to 248F (120C), which covers typical under-hood temperatures for most performance applications.