EVIL ENERGY 1in Fuel Transfer Hose 10ft - Durable Farm Fuel Hose

Our review of the EVIL ENERGY 1in Fuel Transfer Hose 10ft finds it best suited for farmers, small fuel pump operators and DIYers who need a durable, weather resistant replacement hose for dispensing diesel and other fuels. The single biggest reason to buy is its robust construction: a nitrile rubber inner, stainless steel braid mid layer and PVC/nitrile blended outer give it the stiffness and durability customers praise while staying compatible with a wide range of liquids. It is a practical, no-frills hose built for heavy use around tanks and pumps.

Key Features

• 1in inner diameter: The 1in (25mm) ID and 10ft length provide a common fit for farm tanks and pump setups without excess slack.
• High working pressure: Rated for 150 PSI working pressure and 435 PSI burst pressure, it handles typical dispensing tasks with a wide safety margin.
• Wide temperature range: Rated from -40 F to 212 F so it performs in cold storage and warm outdoor conditions without becoming brittle.
• Layered construction: Nitrile rubber inner, stainless steel braid mid and PVC/nitrile outer offer chemical resistance and reinforcement for longevity.
• Broad fuel compatibility: Compatible with diesel, gasoline, kerosene, biodiesel blends and ethanol mixes, reducing the need for multiple hoses.
• Practical bending radius: The 200mm minimum bending radius keeps flow consistent while still allowing flexible routing around tanks and fittings.

Who It's For

The hose is aimed at agricultural users, small fuel dispensing operations and homeowners who maintain on-site diesel tanks or use transfer pumps. It suits anyone who needs a replacement or upgrade to a stock hose and values mechanical strength and broad chemical compatibility.

It is not ideal for precision laboratory transfers, extremely tight routing that requires a smaller bending radius, or applications that demand specialized aviation or marine approvals. Buyers who need very long runs should look for longer lengths or hose reels rather than this 10ft section.

Pros & Cons

Pros

• Durable layered build stands up to weather, rodents and regular handling.
• Works with many fuels including diesel, gasoline, biodiesel blends and ethanol mixes.
• Good pressure ratings for farm and pump use, providing peace of mind during transfers.

Cons

• Noticeable stiffness reported by some users can make tight routing or storage slightly more difficult.
• Sold as a 10ft section only, so additional fittings or longer lengths require planning.

Specifications

Hose ID	1in (25mm)
Outer Diameter	35.5mm
Length	10ft (3.05m)
Working Pressure	150 PSI
Burst Pressure	435 PSI
Temperature Range	-40 F to 212 F
Construction	Nitrile rubber inner, stainless steel braid, PVC/nitrile outer

Our Verdict

The EVIL ENERGY 1in Fuel Transfer Hose 10ft is a solid, value-minded choice for farmers and small-scale fuel handlers who need a tough replacement hose that works with diesel, gasoline and biodiesel blends. Its reinforced construction and respectable pressure and temperature ratings make it a dependable utility hose; buyers should accept some stiffness and plan for connectors or additional length if required.

Frequently Asked Questions

Can this hose handle biodiesel?
Yes, it is listed as compatible with biodiesel including 100% biodiesel and B-20 blends.

Is the hose suitable for cold climates?
Yes, the working temperature range down to -40 F means it remains usable in cold conditions.

Will it fit standard farm tank fittings?
The 1in ID is a common size for farm tanks, but users should check connector thread size and consider fittings supplied separately.