FCOB WS2814 RGBW COB LED Strip 24FT DC24V - High Density Color Chasing

In this review the FCOB WS2814 RGBW COB LED strip is presented as a high-density, addressable lighting solution best suited for DIY interior accent lighting and cove installations where bright, uniform color and programmable chasing effects matter most. The single biggest reason to buy is its Flip Chip On Board design combined with WS2814 addressable chips, which delivers very uniform, bright light and flexible color chasing across a full 24ft strip while maintaining a useful 4000K natural white option.

Key Features

• Addressable LEDs: WS2814 IC chips drive groups of LEDs for pixel-level control and complex chasing effects when paired with compatible controllers.
• High density: 784 LEDs per meter and 14 ICs per meter provide very smooth color gradients and reduce visible dark gaps compared with standard 5050 strips.
• FCOB uniform light: Flip Chip On Board construction gives softer, more even illumination without dark centers, making it better for visible cove and backlighting.
• RGB plus natural white: Includes RGB mixing plus a 4000K natural white channel for practical white lighting as well as vivid color effects.
• Flexible and cuttable: Strip is soft, 10mm wide, and can be cut at 71mm intervals and reconnected end to end with provided connectors.
• Long life and support: Double-layer copper PCB for heat dissipation and a rated lifespan over 65,000 hours with a 12 month warranty and customer support.

Who It's For

This strip is aimed at hobbyists, interior decorators, and installers creating dynamic indoor accent lighting, such as cove lighting, under-cabinet illumination, mirror backlights, or stair and corridor effects. It is especially useful when smooth chasing patterns and a natural white channel are required alongside rich RGB color mixing.

Those who need an all-in-one kit with a power adapter or controller included should look elsewhere, since the package omits a power supply and controller. Users unfamiliar with addressing protocols or who do not intend to use a programmable controller may also find simpler non-addressable strips easier to set up.

Pros & Cons

Pros

• Very bright and uniform output from FCOB construction, reducing visible hot spots.
• Extensive color control via WS2814 addressable ICs for complex chasing and mixed-color scenes.
• Includes practical 4000K natural white for functional illumination in addition to RGB effects.
• Flexible, cuttable design with connectors and mounting clips for straightforward installation.

Cons

• Controller and power supply are not included, so additional purchases and setup are required.
• Some users report mixed experiences with color change performance depending on controller choice and configuration.

Specifications

Length	24ft (approximately)
LED density	784 LED per meter
IC type and density	WS2814 addressable IC, 14 IC per meter, 105 IC total
Voltage	DC 24V
White color	4000K natural white
Width	10mm (0.39 in)
IP rating	IP30 indoor use only

Our Verdict

The FCOB WS2814 RGBW COB LED strip is a solid choice for anyone building programmable indoor accent lighting who values uniform brightness and advanced chasing effects. It represents good value when paired with a capable controller and separate 24V supply, delivering bright, smooth color mixing plus a usable 4000K white for practical illumination.

Frequently Asked Questions

Does the strip include a controller or power supply?
It does not include a controller or power supply; those must be purchased separately and must support WS2814 addressable ICs and 24V input.

Can the strip be cut and reconnected?
Yes, the strip is cuttable at 71mm intervals and comes with a 3PIN male connector and wire-to-strip connectors for linking sections.

Is this strip suitable for outdoor use?
No, the strip is IP30 and intended for indoor use only; use only in dry, indoor environments.