Fisch Chrome Vanadium Wood Twist Drill Bits, 29-Piece Set - Clean Wood

In this review the Fisch 29-piece chrome vanadium brad point drill bit set is judged for woodworkers and hobbyists who need clean, accurate holes without frequent resharpening. The bottom line: this set is best for DIYers and professional woodworkers who drill a range of Imperial sizes and value a brad point profile that minimizes tear-out. The reviewer found the bits hold an edge longer thanks to the chrome-vanadium steel and deliver clean entry cuts in hardwood, softwood and laminated materials when used in cordless drills or a drill press.

Key Features

• Durable material: Chrome-vanadium steel construction lasts longer between sharpening and keeps cutting edges consistent over time.
• Brad point design: Optimized outer spurs score the outer rim first to reduce tear-out and produce crisp holes in veneered and laminated surfaces.
• Beveled cutting edge: A beveled edge guides the bit without deviation, making it easier to feed the bit straight into the workpiece.
• Wide material compatibility: Suitable for soft, hard, exotic woods, MDF and even acrylic Plexiglas when used at recommended speeds.
• Full shank sizes: Bits 3/8 in and smaller have full diameter shanks for better grip in standard chucks and less wobble.
• Complete Imperial range: The set covers common inch fractions from 1/16 to 1/2 in in 1/64 increments, reducing the need for additional purchases.

Who It's For

The Fisch 29-piece set is ideal for woodworkers, cabinetmakers, and serious DIYers who work across a variety of timbers and need precise holes for dowels, hinges or hardware. It suits both cordless drill use and drill press setups when following the recommended drilling speeds of around 2,000 to 3,000 RPM for clean results.

It is less suited to users who only ever drill metal or concrete, or those who need metric sizes; buyers requiring metric measurements or specialized masonry bits should look elsewhere. Also, if you need micro or very large bits beyond the supplied range, consider supplementing this set.

Pros & Cons

Pros

• Longer edge life from chrome-vanadium construction reduces sharpening frequency for regular users.
• Brad point and outer spurs minimize tear-out on laminated and veneered boards for cleaner finish work.
• Full diameter shanks on smaller bits improve chuck grip and reduce runout during drilling.

Cons

• Set contains only Imperial sizes; users who need metric increments will need a different kit.
• The plastic stand case is handy but not as rugged as a metal chest for heavy shop use.

Specifications

Brand	Fisch
Material	Chrome-vanadium steel
Bit type	Brad point / wood twist
Sizes	Imperial 1/16 in to 1/2 in in 1/64 in increments (29 pieces)
Shank	Full diameter on bits 3/8 in and smaller
Recommended speed	About 2,000 to 3,000 RPM
Case	Plastic stand case

Our Verdict

The Fisch 29-piece chrome vanadium brad point set is a strong value for woodworkers who need accurate, tear-out-free holes across common Imperial sizes. It combines durable material and a brad point profile that keeps edges longer and produces cleaner holes, making it a practical centerpiece for a home or small professional shop.

Frequently Asked Questions

Can these bits be used in a drill press?
Yes, they work well in a drill press as well as cordless drills; maintain recommended speeds of roughly 2,000 to 3,000 RPM for best results.

Are these suitable for laminated or veneered panels?
Yes, the optimized outer spurs score the rim first to reduce tear-out on veneered and laminated materials.

Do the bits include metric sizes?
No, this set is Imperial only, covering sizes from 1/16 in to 1/2 in in 1/64 in steps.