Gigabit PoE Extender Passthrough Switch - Compact 1 in 2 out PoE

In this review of the Gigabit PoE Extender Passthrough Switch the bottom line is clear: this small metal PoE device is for installers and technicians who need a compact, wall-mountable way to extend power and Ethernet to two downstream devices without adding an AC adapter. The reviewer found the unit most valuable as a powered passthrough that supports full gigabit speeds and multiple PoE standards, so it works with cameras and access points that require IEEE 802.3af/at/bt or Hi-PoE, while still being a straightforward plug-and-play utility for tight installations.

Key Features

• Gigabit passthrough: The three 10/100/1000Mbps ports provide full gigabit throughput so downstream devices are not limited by a 100Mbps bottleneck.
• Flexible PoE support: Supports IEEE 802.3af, at and bt up to 60W and Hi-PoE to 90W so it can power a range of cameras and wireless APs that need higher wattage.
• Three-in-one power modes: Can operate as a PoE extender, a network extender or a PoE switch/injector depending on whether it is powered via PoE or an external DC input.
• Plug-and-play simplicity: Unmanaged operation with automatic power detection and LED port status lights removes the need for configuration during deployment.
• Rugged compact design: Metal housing with mounting ears and a fanless build makes it suitable for wall-mount spots where space and heat are concerns.

Who It's For

The Gigabit PoE Extender is aimed at installers, small IT teams and homeowners who need to power and connect one or two PoE devices from a single PoE feed without running AC power to the location. It is particularly handy for extending a PoE run to an outdoor camera or a remote wireless access point where wall space is limited.

Those who should look elsewhere include users who require managed switching features, VLANs or PoE budgeting with a GUI, and anyone relying on legacy passive 24V PoE devices because this unit does not support passive 24V PoE.

Pros & Cons

Pros

• Compact metal case and wall-mount ears make installation tidy and secure in confined spaces.
• Supports modern PoE standards including IEEE 802.3af/at/bt and Hi-PoE, allowing higher-watt devices to be powered.
• Gigabit 10/100/1000Mbps ports keep network speed consistent for connected devices.
• Unmanaged plug-and-play operation with LEDs for quick status checks during installs.

Cons

• Not compatible with passive 24V PoE devices, which limits use with some older equipment.
• No built-in management, so advanced traffic control or PoE scheduling is not available.

Specifications

Ports	1 PoE In, 2 PoE Out
Data Rate	10/100/1000Mbps
PoE Standards	IEEE 802.3af / 802.3at / 802.3bt
Maximum PoE Power	60W (standard), Hi-PoE 90W
PoE Voltage	44-57 Vdc
Power Options	Powered by PoE or DC 12V/37-57V input (power supply not included)
Form Factor	Metal case, wall mount ears, fanless

Our Verdict

For installers who need a simple, reliable way to extend PoE and network connectivity to two devices, this Gigabit PoE Extender Passthrough Switch delivers strong value: it preserves gigabit throughput, supports modern PoE standards up to Hi-PoE, and fits tidy wall-mount installations. It is not for users who need managed switch features or support for passive 24V PoE, but for most camera and AP deployments it is a practical, cost-effective tool.

Frequently Asked Questions

Can this unit be powered only by PoE?
Yes. The default operation is powered by PoE, and it will also accept DC inputs for different modes.

Does it support passive 24V PoE?
No. This device does not support passive 24V PoE and requires standard IEEE PoE voltages.

Will it slow down gigabit devices?
No. The ports are 10/100/1000Mbps so connected gigabit devices will run at full gigabit speeds.