GM CLIMBING 16mm Nylon Daisy Chain Sling 120cm - Durable Aid Climb

In this review the GM CLIMBING 16mm Nylon Daisy Chain Sling is examined for climbers and riggers who need a compact, adjustable tether for aid climbs, ascenders, or lightweight suspensions. The single biggest reason to buy is its combination of rapid length adjustment and certified strength: the sewn daisy chain provides ten reinforced pockets for fast clipping without tying knots, while the full unit is rated to 22kN and carries CE and UIAA certification. The review focuses on real-world handling, durability, and the few trade-offs to expect.

Key Features

• Rapid length adjustment: Ten evenly spaced pockets with bar-tack reinforcement let a user change tether length quickly without tying or untying knots, saving time on the wall.
• Certified strength: The full sling is rated at 22kN with each pocket stitch rated at 3kN, providing transparent load capacity for rigging and safety planning.
• Durable webbing: Constructed from 16mm tubular nylon, the daisy chain resists abrasion and stands up to repeated clipping and unclipping during multi-pitch climbs.
• Half-twist long loop: The stitched half-twist end loop sits flat for a clean girth hitch to a belay loop or tie-in points, reducing bulk and unwanted twists on the harness.
• Versatile use: Beyond aid climbing it works well for organizing gear, rigging ascenders, suspending light hammocks or aerial yoga setups where repeated length changes are needed.

Who It's For

The sling is best for trad and aid climbers who use jumars or ascenders and need multiple predictable attachment points; it also suits guides and riggers who value quick reconfiguration without knots. Recreational users who want a tough, adjustable tether for hammocks or hauling bags will find the certified strength reassuring.

Those who should look elsewhere include climbers needing a single continuous sling with no intermediate stitch points for high directionality loads, and users expecting each pocket to match the full 22kN rating - pockets are rated individually lower and require correct clipping practice.

Pros & Cons

Pros

• Excellent rapid adjustment that eliminates frequent knot changes and reduces on-harness fuss.
• Clear certification (CE and UIAA) and a 22kN full-sling breaking strength for planning safe setups.
• Sturdy 16mm tubular nylon construction that balances durability and manageable bulk.
• Half-twist end loop provides a tidy, low-profile girth hitch on harness points.

Cons

• Individual pocket stitch rating is lower at about 3kN, so correct clipping practice is mandatory to retain redundancy.
• Some users report mixed stitching quality, so inspect stitching before committing to critical loads.

Specifications

Our Verdict

The GM CLIMBING 16mm Daisy Chain is a practical, value-oriented tool for climbers and riggers who need fast, reliable length adjustments and certified strength. It is especially good for aid climbs, ascender rigs, and gear organization where multiple attachment points matter; just be mindful of the lower per-pocket rating and inspect stitching before use. For its durability and convenience, it represents a sensible addition to a kit without excessive cost.

Frequently Asked Questions

Can I clip adjacent pockets with one carabiner?
No. Always use another connector to shorten the daisy chain; clipping two or more pockets with the same connector risks bar-tack failure and loss of clipping security.

Is this daisy chain rated for hammock or aerial yoga suspension?
It is CE and UIAA certified with a 22kN full-sling rating, so it is suitable for light suspension and recreational hammock use, but always inspect stitching and follow safe rigging practice.

What should I check before each use?
Visually inspect bar-tack stitches and the half-twist end loop for wear or loose stitching, and verify your clipping method to avoid relying on a single pocket stitch under critical load.