HDMI Extender Splitter 1x2 4K@60Hz over CAT5/6/7 - Long Reach

In this review of the HDMI Extender Splitter 1x2, the bottom line is simple: it is for anyone who needs reliable 4K video distribution to two displays over long cable runs. The unit delivers 4K@60Hz video and supports IR control and POC power, which makes setup and remote operation straightforward. Installation is plug-and-play for basic setups and the built-in power switch adds a layer of safety, so the product is best for AV installers, small offices, classrooms, and home theater hobbyists who need clean signal extension without running long HDMI cables.

Key Features

• 4K HD Resolution: Sends up to 4K@60Hz for higher pixel density and clearer image detail compared with 1080p sources.
• Long Distance Transmission: Extends HDMI video over CAT5/CAT6/CAT7 up to 60m (196 ft) to reach distant monitors or projectors without signal loss from long HDMI runs.
• POC Technology: Supports unilateral power over cable so the transmitter or receiver can provide power across long distances for simpler wiring.
• IR Pass Back: Supports 20~60KHz IR control so users can operate the source device remotely from the display location.
• Power Switch: Built-in power on/off switch improves safety and makes it convenient to cut power without unplugging adapters.

Who It's For

This unit is aimed at AV installers and facilities managers who need to distribute a single HDMI source to two displays in classrooms, conference rooms, retail signage, or home theaters while keeping cable runs tidy. Its support for IR control and POC reduces the need for extra power bricks at each end, which is helpful in clean installations.

Shoppers who need multiroom HDMI switching with advanced matrix features or those who require distances beyond the specified 60m should look at larger commercial matrix systems or fiber solutions. Users expecting flawless audio on every setup may want to confirm compatibility with their specific receivers since customer feedback on sound was mixed.

Pros & Cons

Pros

• Reliable 4K@60Hz video over standard network cable, keeping image quality high for displays up to 60m (196 ft).
• POC support simplifies deployment by allowing unilateral power delivery across the cable run.
• IR pass back makes it possible to control the source device from the remote display location.
• Simple installation and a power switch add convenience and a sense of safety.

Cons

• Some users reported mixed results for audio quality in certain setups, so compatibility checks are advised.
• Not intended as a full commercial matrix switcher; limited to 1x2 splitting over CAT cable with a 60m range.

Specifications

Brand	PWAYTEK
Resolution	Up to 4K@60Hz
Extension Cable	CAT5/CAT6/CAT7
Maximum Distance	Up to 60m (196 ft)
Power Technology	POC unilateral power supply
IR Support	20~60KHz IR pass back
Controls	Power switch

Our Verdict

The HDMI Extender Splitter 1x2 is a practical, cost effective solution for extending a single 4K source to two displays up to 60m away using CAT cable. It offers useful installation features like POC and IR pass back, and the power switch is a small but meaningful safety addition. For AV installs, classrooms, and small venues needing simple 4K distribution, it delivers solid value provided audio compatibility is checked in advance.

Frequently Asked Questions

Can this splitter send 4K to two screens at once?
Yes, it supports distribution of a 4K@60Hz signal to two displays over CAT5/CAT6/CAT7 cabling.

Does it need power at both ends?
No, it supports POC unilateral power, so one unit can supply power across the cable in many setups.

Can I control the source from the remote display?
Yes, IR pass back is supported (20~60KHz) so a remote can control the source device from the display location.