Heat Transfer Sublimation Tape 100mm x 50m (2 Rolls) - High Temp No

In this review of the 2 Rolls 100mm x 50m Sublimation Heat Transfer Tape, the bottom line is simple: it's a practical, workhorse tape for anyone who needs reliable high temperature masking and fixing during heat press or electronic processes. The reviewer found the pair of brown polyester film rolls especially useful for long runs because each roll is 100 mm wide and 50 m long, and the silicone adhesive holds through high heat without leaving residue. If you need a heat-resistant, solvent- and abrasion-tolerant tape for sublimation, soldering, or coating tasks, this product earns consideration.

Key Features

• Two long rolls: You receive two 100 mm wide by 50 m long rolls, providing ample length for repeated projects and less frequent reordering.
• High temperature rating: The tape withstands a wide temperature range from long term -73 C to short bursts up to 260 C, so it handles heat press and soldering cycles.
• Durable construction: Made from polyester film with a high temperature silicone adhesive, it resists UV, acids, alkalis, oil, moisture and abrasion for dependable masking.
• Low residue: The adhesive is formulated to peel cleanly, which minimizes cleanup after baking, sublimation, or painting tasks.
• Versatile uses: Useful across sublimation pressing, circuit board insulation, powder coating masking, and general electronic protection during high temperature work.

Who It's For

This tape is aimed at craftsmen, small production shops, and hobbyists who perform heat transfer printing, powder coating, or high temperature electronics work and need a no-residue masking solution that survives baking and soldering temperatures. The 100 mm width is convenient for securing larger templates, holding vinyl edges during a press, and masking connector areas on PCBs.

Those who should look elsewhere include users who need clear or highly stretchable tapes for delicate textiles, or adhesive films rated for continuous use above 260 C. If you require specialized low-temperature removables for very delicate surfaces, consider a product formulated specifically for that niche.

Pros & Cons

Pros

• High temperature resistance suitable for most sublimation and soldering tasks.
• Two generous rolls ensure long service life and fewer replacements.
• Durable polyester film and silicone adhesive resist chemicals and abrasion.
• Leaves minimal residue, reducing post-process cleanup.

Cons

• Brown polyimide style finish may not suit applications that require an inconspicuous or clear tape.
• Not intended for continuous use above the stated short-term peak temperature of 260 C.

Specifications

Brand	Oleitodh
Quantity	2 rolls
Width	100 mm (approx. 0.39 in)
Length per roll	50 m (164 ft)
Material	Polyester film with high temperature silicone adhesive
Temperature range	Long term -73 C to 260 C short term
Residue	Minimal / designed to not leave residue

Our Verdict

For anyone who runs heat presses, does sublimation, or needs a resilient masking tape for electronic soldering and coating, these two 100 mm by 50 m rolls offer strong value. The combination of wide coverage, chemical resistance and a silicone adhesive that peels cleanly makes it a reliable choice for production and hobby projects, though those needing transparent tape or extreme continuous temperature ratings should compare specialized alternatives.

Frequently Asked Questions

Is this tape safe for use in a sublimation heat press?
Yes; the tape is formulated for heat press use and resists the temperatures typical of sublimation processes while leaving minimal residue.

Will the adhesive come off during soldering or baking?
The silicone adhesive is high temperature resistant and designed to resist breakdown and leave little to no residue after baking or soldering cycles.

Can it be used on circuit boards and electronics?
Yes; it is suitable for insulating and protecting electronic components, motor parts, and PCB areas during high temperature work.