Heavy Duty Power Strip Surge Protector 20 Amp - Industrial Garage Use

In this review the CCCEI Heavy Duty Power Strip Surge Protector is evaluated for workshop and garage use, and its biggest selling point is clear: a 20 amp rated, heavy duty unit built for higher-draw tools and appliances. The reviewer found it most useful where multiple high-power devices need to run from a single, durable strip, especially when wall mounting and wide outlet spacing matter. The review focuses on real-world performance, construction, and safety features to help buyers decide if this strip belongs in their shop.

Key Features

• 20 Amp rating: Supplies up to 20A at 125V for heavier tools and appliances without the thin wiring of light-duty strips.
• Metal housing and mountable body: A rigid enclosure with two hanging holes makes it easy to secure to a workbench or wall for a tidy, permanent setup.
• Six wide spaced outlets: The layout accepts bulky plugs and adapters without blocking neighboring sockets, useful for combo chargers and large plugs.
• Surge protection and resettable breaker: Built-in 1200J surge protection with a reset switch and 20A circuit breaker adds overload protection and a simple recovery option.
• 12 gauge 6 ft cord: A heavy 12 AWG cord and 6 ft length reduce voltage drop and allow flexible placement in a shop or garage.

Who It's For

This power strip is aimed at homeowners, mechanics, and hobbyists who run heavier bench tools, compressors, battery chargers or multiple appliances in a garage or workshop and need a robust, mountable strip that handles higher current than typical consumer units. The grounded 6-20R T-slot plus standard outlets make it practical for mixed equipment.

It is not the best choice for continuous outdoor exposure unless additional weather protection is provided, and users on a 15A circuit must respect the 1875W limit to avoid nuisance breaker trips or overload. If very precise surge ratings or outdoor-rated enclosures are required, consider a purpose-built outdoor or UL-listed industrial solution.

Pros & Cons

Pros

• High amp 20A design and 12 gauge cord handle heavier tools better than consumer strips.
• Sturdy build and mounting holes make it convenient to fasten to a wall or bench for a permanent installation.
• Wide spaced outlets and a T-slot 6-20R accept larger plugs and adapters without crowding.

Cons

• Some users report breaker trips under heavy loads near 1700W, so it can be sensitive on a 15A circuit.
• Not intended for unprotected outdoor use without additional weatherproofing.

Specifications

Our Verdict

The CCCEI heavy duty power strip is a practical, value-oriented choice for garage and workshop users who need a mountable, higher amp strip with wide spaced outlets and surge protection. It balances sturdiness, a heavy 12 AWG cord and overload protection at a modest cost, but buyers should observe circuit limits on 15A household circuits and keep it protected from the elements.

Frequently Asked Questions

Can this plug into a standard 15A outlet?
Yes, it can be plugged into a 15A outlet via the 5-15P cord, but you must not exceed 1875W on that circuit to avoid overload.

Is this unit suitable for outdoor use?
It is built for garage and shop use; protect it from direct weather and moisture if used outdoors as it is not rated as a weatherproof outdoor strip.

Will large plug adapters block adjacent outlets?
No, the wide spaced outlets are designed to accommodate large plugs and adapters without blocking neighboring sockets.