Hydraulic Disc Brake Set MT200 Front 800mm Rear 1450mm - Solid Upgrade

In this review of the MT200 hydraulic disc brake set, the bottom line is simple: this kit is for riders who want an affordable, direct-replacement hydraulic upgrade that delivers noticeably better stopping power than typical mechanical brakes. The set ships pre-filled and pre-bled and is assembled with the left lever for the front and the right lever for the rear, making installation straightforward for most mountain and trail bikes under 29 in. The strongest reason to buy is the combination of ready-to-fit hoses (800mm front, 1450mm rear) and complete hardware, which gets a bike back on the trail quickly while improving braking performance.

Key Features

• Pre-bled and ready: The brakes arrive filled and bled so riders can install and use them without an initial bleed, saving time and reducing setup fuss.
• Hose lengths: The kit includes an 800mm front hose and a 1450mm rear hose, which cover common frame layouts for many mountain bikes under 29 in.
• Complete kit: Levers, calipers, two brake pads and the BH59 insert and bush are supplied, so no extra parts are required for direct bolt-on installs in compatible frames.
• Reach adjustable lever: The lever reach is adjustable, allowing riders to fine tune feel and ergonomics for personal comfort and control.
• B01S resin pads: The included resin pads give predictable initial bite and reduce noise under typical trail conditions.

Who It's For

This brake set suits weekend trail riders and commuters who want a low-cost hydraulic upgrade from mechanical systems or worn OEM hydraulics, especially when the bike frame accepts an 800mm front hose and a 1450mm rear hose. Riders who prefer a kit that arrives usable with minimal bleeding or tuning will appreciate the pre-filled assembly.

It is not the right choice for owners of bicycles larger than 29 in or for riders who need custom hose lengths out of the box; those users should measure hose routing carefully or seek a different kit that matches their frame geometry or offers longer hoses.

Pros & Cons

Pros

• Improved stopping power and modulation compared with many mechanical brake upgrades.
• Easy installation because the set is complete and comes pre-bled.
• Adjustable reach and included resin pads make initial setup and comfort straightforward.

Cons

• Hose lengths are fixed at 800mm and 1450mm, so riders with larger frames or nonstandard routing may need to replace or shorten hoses.
• Durability feedback is mixed from some users, so long-term performance may vary by riding conditions and maintenance.

Specifications

Our Verdict

The MT200 hydraulic disc brake set is a practical, value-forward upgrade for riders looking to move from mechanical to hydraulic braking or to replace worn stock hydraulics on bikes under 29 in. Its pre-bled readiness, included hardware and improved stopping power make it a sensible buy for weekend riders, commuters and anyone who wants a simple swap-in hydraulic solution without paying for premium models.

Frequently Asked Questions

Are these brakes ready to install out of the box?
Yes, the set comes pre-filled and pre-bled so it can be installed and used without an initial bleed.

Will the supplied hose lengths fit my bike?
The kit includes an 800mm front hose and a 1450mm rear hose; measure your current hose routing to ensure compatibility, especially on larger frames.

Can I swap lever sides?
If you prefer the opposite left-right lever arrangement you can exchange the tubes or contact support for guidance.