INLAND PLA+ 1.75mm 2-Pack Filament White & Gray - Reliable Prints

In this review of the INLAND PLA+ 1.75mm 2-pack, the bottom line is simple: this filament is aimed at hobbyists and small-batch makers who want consistent, easy-to-print material without extra fuss. The reviewer found the two 1 kg spools (white and gray) deliver dependable dimensional accuracy and minimal odor, making them ideal for routine prototyping and display parts. The strongest reason to buy is the combination of vacuum-sealed, dry packaging and a tight dimensional tolerance that reduces print failures and saves time spent troubleshooting.

Key Features

• Dimensional accuracy: The 1.75mm filament is manufactured to +/- 0.03mm tolerance, which helps maintain consistent extrusion and tighter fitting parts across prints.
• Easy to print: Recommended extrusion temps of 205C-225C and a moderate bed temp of 45C-60C make this PLA+ straightforward to dial in on most FDM printers.
• Dry, sealed packaging: Each spool arrives vacuum sealed with desiccant to prevent moisture uptake and preserve good layer adhesion and surface finish.
• Improved toughness: PLA+ formulation is less brittle than standard PLA, so printed parts show better impact resistance and layer bonding.
• Wide compatibility: Wound on a cardboard spool with a 2.00 in hub hole, the filament works with most 1.75mm setups and is easy to mount on common spool holders.

Who It's For

This filament is best for hobbyists, educators, and makers who run routine prints and value consistent results and color accuracy for models, prototypes, and display pieces. Its easy temperature range and sealed packaging suit users who want fast setup and fewer failed prints due to moisture or diameter variation.

Those doing advanced engineering parts that need very high temperature resistance, flexible materials, or specialty properties should look elsewhere, but for standard prototyping, visual models, and durable hobby parts this PLA+ is a practical choice.

Pros & Cons

Pros

• Consistent diameter tolerance gives reliable extrusion and predictable prints.
• Vacuum sealed spools arrive dry, reducing stringing and adhesion issues when handled correctly.
• PLA+ blend improves toughness over basic PLA, yielding stronger parts and better layer adhesion.
• Affordable two-color pack offers value for everyday printing needs.

Cons

• Some users report occasional stringing or tangles if the filament is not managed carefully on the spool.
• The cardboard spool is functional but less durable than moulded plastic spools over long-term heavy use.

Specifications

Material	PLA Plus (PLA+)
Filament diameter	1.75mm (0.03mm)
Spool weight	1 KG (approx 2.20 lbs) per spool
Recommended nozzle temp	205C - 225C (401F - 437F)
Recommended bed temp	45C - 60C (113F - 122F)
Cardboard spool diameter	8.81 in (223.77 mm)
Spool hub hole	2.00 in (50.80 mm)

Our Verdict

The INLAND PLA+ 1.75mm two-pack is a sensible, value-focused choice for makers who want dependable prints with minimal setup time. Its tight tolerance, sealed packaging, and tougher PLA+ formulation make it especially suitable for prototyping and visual parts; just manage the spool carefully to avoid tangles and occasional stringing.

Frequently Asked Questions

Will this filament work on most printers?
Yes. It is 1.75mm filament with a common spool hub size and runs on most FDM/FFF printers when set to the recommended temps.

Do I need a heated bed?
A heated bed set to 45C-60C is recommended for best adhesion, but many small prints can be made without a heated bed depending on the model and adhesion aids used.

How is moisture handled?
Each spool is vacuum sealed with desiccant so it arrives dry; store in a dry place or use a filament dry box for long-term storage.