JAYO PLA+ Filament 1.75mm Pack of 4 - Strong, Low-Warp PLA

In this review of the JAYO PLA+ Filament 1.75mm pack of 4, the bottom line is simple: makers and small shops who need reliable, brighter PLA prints with improved toughness will get the most value. The spool set includes Black, White, Blue and Red and the biggest reason to buy is the filament's combination of tighter diameter tolerance and PLA+ toughness, which reduces warping and improves success rates compared with standard PLA. The reviewer found it to be a practical, everyday filament for FDM printers when run near the recommended settings.

Key Features

• PLA+ Strength: The PLA Plus formulation offers noticeably higher strength and better toughness than normal PLA, helping parts resist impact and handle functional use.
• Dimensional Accuracy: At 1.75 mm with dimensional accuracy of +/- 0.02 mm, the filament feeds consistently and reduces extrusion variation for cleaner layers.
• Neat Winding: Spools are neatly wound to lower the risk of tangles and reduce mid-print snarls that can ruin long jobs.
• Clog- and Bubble-Free: Improved flowability and clean extrusion behavior cut down on clogs and bubbles when printers are set up properly.
• Vacuum Packed: Individual vacuum packaging with desiccant helps keep the filament dry for better print quality and shelf life.
• Recommended Settings: Suggested nozzle and bed temperatures and a broad speed range give a clear starting point for dialing in prints.

Who It's For

The JAYO PLA+ pack is aimed at hobbyists, educators and small workshop users who need consistent, colorful PLA that prints with less warping and better toughness than standard PLA. It works well for prototypes, display pieces and moderately functional parts where a balance of strength and printability is important.

Users looking for specialty filaments (flexible, carbon-filled, or high-temperature engineering plastics) should look elsewhere; this PLA+ is not a substitute for nylons or high-temp resins. Also, those who demand guaranteed tangle-free performance every spool should be aware that some customers occasionally report feeding issues, so careful spool handling is advised.

Pros & Cons

Pros

• Good print quality and color accuracy across the included Black, White, Blue and Red spools.
• Tighter diameter tolerance (+/- 0.02 mm) delivers consistent extrusion and layer lines.
• Improved toughness and lower warping compared with standard PLA for more reliable parts.
• Vacuum packing with desiccant reduces moisture-related problems out of the box.

Cons

• Some users report occasional tangles or feeding problems, so spool management remains important.
• Not suitable for demanding engineering or high-temperature applications that require specialty materials.

Specifications

Brand	JAYO
Material	PLA Plus (PLA+)
Diameter	1.75 mm
Dimensional Accuracy	+/- 0.02 mm
Weight per Spool	1.1 Kg
Colors Included	Black, White, Blue, Red (pack of 4)
Recommended Nozzle Temp	210-235C

Our Verdict

The JAYO PLA+ 1.75 mm 4-color spool pack is a sensible choice for makers who want stronger, brighter PLA prints without complicating their workflow. With tight diameter tolerance, vacuum packaging and clear print settings, it offers good value for everyday prototyping and decorative or mildly functional parts, provided users manage spools carefully to avoid the occasional feeding tangle.

Frequently Asked Questions

What temperature should I print this PLA+ at?
Print at 210-235C for the nozzle and 55-65C for the bed as a starting point, then fine-tune for your printer and part.

Are the spools dry and ready to print?
Yes, each spool is vacuum packed with a desiccant to reduce moisture; allow filament to reach room conditions before printing.

Will this filament work on any FDM printer?
It is suitable for most FDM printers that use 1.75 mm filament, thanks to its dimensional accuracy and general flowability, but check tolerances for very tight extruders.