Skip to product information
1 of 1

LC-ST OS2 Fiber Patch Cable 85m Duplex - High-Speed Singlemode

LC-ST OS2 Fiber Patch Cable 85m Duplex - High-Speed Singlemode

Regular price $95.94 USD

Price subject to change. Tap below for current.

In this review of the LC-ST OS2 fiber patch cable, the bottom line is clear: this cable is aimed at network engineers, data center technicians, and IT teams that need a long, reliable singlemode jumper with low insertion loss. The 85m (278.87 ft) duplex length fills a niche between short patch cords and permanent links, and the use of Corning OS2 glass and ceramic ferrules is the single biggest reason to consider it for high-bandwidth 10Gb and higher links where signal integrity matters.

Key Features

  • Connector Pairing: LC to ST termination gives flexibility for equipment and panel types that use LC ports and legacy ST bulkheads.
  • High-Quality Core: Genuine Corning OS2 singlemode glass preserves signal fidelity and reduces attenuation across the 85m run.
  • Performance Range: Supports common Ethernet tiers including 1Gb, 10Gb, 40Gb, and short-range 100Gb applications depending on link design.
  • Durable Construction: Reinforced 2.0mm zip-cord jacket resists kinks and makes installation in racks and conduits easier.
  • Precision Ferrules: Ceramic ferrules on LC and ST ends minimize insertion loss and help maintain consistent connections over repeated matings.

Who It's For

This cable is best for enterprise network teams, telecom installers, and data center staff who need a longer duplex singlemode jumper between equipment and patch panels or across larger racks. The combination of OS2 glass and ceramic ferrules makes it suited to environments where low-loss transmission is important for 10Gb links and beyond.

Users who require multimode fiber, very short patch cords under 1m, or field-terminable options should look elsewhere; this product is a preterminated singlemode LC-ST duplex jumper intended as a finished cable rather than a field fiber assembly service.

Pros & Cons

Pros

  • High signal integrity thanks to Corning OS2 glass and ceramic ferrules.
  • Long 85m length covers many rack-to-rack or room-to-room runs without splices.
  • Reinforced zip-cord jacket improves durability and eases cable management.

Cons

  • Terminated as LC to ST only, so incompatible with some connector types without adapters.
  • Not field-terminable; replacement required if a custom connector or different length is needed.

Specifications

Fiber type OS2 singlemode 50/125m
Length 85 m (278.87 ft)
Configuration Duplex (2 fiber strands)
Connectors LC to ST terminated with ceramic ferrules
Bandwidth / modal 1500/2000 MHz-km at 850nm/1300nm
Supported speeds 1Gb, 10Gb, 40Gb, short-range 100Gb
Jacket Reinforced 2.0mm zip-cord

Our Verdict

The LC-ST OS2 85m duplex cable is a practical, well-made option for data centers and enterprise networks that require a long singlemode jumper with reliable, low-loss performance. It delivers good value for communications applications where Corning-grade glass and ceramic ferrules are preferred, though teams needing different terminations or field customization will need adapters or alternate products.

Frequently Asked Questions

Is this cable singlemode or multimode?
This is an OS2 singlemode cable, optimized for long-distance, low-loss links.

What connectors are fitted?
The cable is terminated LC on one end and ST on the other, both with ceramic ferrules.

Can this be used for 10Gb Ethernet?
Yes; the cable supports 10Gb links and is suitable for many data center and telecom short to mid-range runs.

Editor's Take

GearMustHave editorial rating: 4.5 out of 5. GearMustHave Editorial Rating

The 85m LC-ST OS2 duplex cable is a reliable singlemode jumper offering Corning glass and ceramic ferrules for low-loss 10Gb and higher links; good value for data centers but fixed terminals limit customization.

View full details

Recently viewed