LifeBasis Radon Detector with TFT Display for Home Safety

The LifeBasis Radon Detector is an essential tool for ensuring the safety of your home environment. With its high-precision semiconductor sensor, this device accurately reflects radon levels, boasting a detection range of 0.09-1000 pCi/L (3.3 Bq/m3 - 37k Bq/m3). The first reading is displayed after just 6 hours, and the radon level updates every hour, providing you with real-time data to monitor your indoor air quality.

One of the standout features of the LifeBasis Radon Monitor is its dual alarm modes. The color-coded bars visually indicate radon gas levels, turning orange or red when hazardous levels are detected. Additionally, the audible alarm will sound, alerting you to take immediate action to protect your family's health. You can also adjust the alert threshold according to your local safety requirements, ensuring that you are always informed.

Long-term monitoring is crucial, as radon levels can fluctuate daily. The LifeBasis Radon Tester allows you to view historical records of radon concentration, with a single record capable of displaying data for up to 504 days. This feature is invaluable for tracking changes over time, as it saves one data point every 6 hours and can store up to 10 sets of detection records.

Designed for convenience, this rechargeable radon monitor comes with a built-in 2000mAh battery and a type-C charge cable. A full charge takes only 3.5 hours, and the battery can last up to 45 days with the screen off. Its compact and lightweight design makes it perfect for various settings, including kitchens, bedrooms, living rooms, basements, garages, offices, schools, and hotels.

User-friendliness is at the forefront of the LifeBasis Radon Detector design. It features a color TFT 2.0 screen and a graphical user interface that simplifies operation and enhances readability. You can customize measurement units (pCi/L or Bq/m3), set alarm thresholds, and adjust screen sleeping time according to your preferences.

It is important to note that after measuring high concentrations of radon, there may be residual radon inside the detector. Complete decay can take between 24 hours and 3.8 days, depending on the pollution level. Therefore, it is recommended to wait 24-48 hours after changing measurement locations to obtain valid data.