LightingWill LED Driver 200W 24V DC Power Supply - Waterproof IP67

In this review the LightingWill LED Driver 200 Watts is evaluated as a straightforward, heavy-duty 24V DC power supply for outdoor LED projects. The single biggest reason to buy is its combination of a full 200W output and an IP67 waterproof rating, which makes it suitable for powering long runs of 24V LED strip lights or multiple landscape fixtures while standing up to wet conditions. The review looks at performance, protection features, build quality and real-world suitability for homeowners and small installers.

Key Features

• 200W output: Supplies a sustained 24V DC at up to 8.3A, making it practical for larger LED strips and clusters of 24V fixtures without frequent overloads.
• Waterproof IP67: The fully sealed housing protects the unit from rain and temporary immersion, allowing safe outdoor installation in gutters, garden boxes and near driveways.
• Wide input range: Accepts 90-140V AC 50-60Hz so it will work reliably on typical household circuits and in regions with slight voltage variation.
• Automatic protection: Built-in hiccup mode for short circuit, overload, over voltage, over current and high temperature helps the supply auto-recover once a fault clears.
• Aluminum alloy housing: A metal case aids heat dissipation and adds mechanical durability for installations where the unit may be exposed to the elements.
• Seller support: The listing states customer support and replacement assistance, which can simplify warranty or defect issues.

Who It's For

The LightingWill 200W LED Driver is best for DIYers, landscape lighting installers and hobbyists who need a robust outdoor-rated 24V supply for longer LED strip runs, multiple 24V bulbs, or a cluster of low-voltage fixtures. Its waterproof IP67 rating and metal housing mean it is well suited to outdoor junction boxes and enclosed locations where moisture is a concern.

It is less appropriate for very small, indoor-only projects where a lower wattage, lighter or non-waterproof adapter would be cheaper and easier to hide. Also, users who require an adjustable dimmable driver should look for a dedicated dimmable power supply, as this unit is a fixed 24V output.

Pros & Cons

Pros

• High continuous power at 24V DC provides capacity for many LED fixtures without multiple supplies.
• IP67 waterproof rating and aluminum housing make it reliable for outdoor use and heat dissipation.
• Comprehensive automatic protections reduce risk of damage and allow auto-recovery after transient faults.
• Wide AC input range fits common household circuits and minor voltage fluctuations.

Cons

• Some users report mixed long-term durability, with reports of failures within months in a few cases, so reliability can vary.
• Not a dimmable or adjustable-voltage supply, which limits use in installations that require brightness control.

Specifications

Model Input	90-140V AC 50-60Hz
Output	24V DC, 8.3A, 200W
Protection Types	Short circuit, overload, over voltage, over current, high temperature (hiccup mode)
Ingress Protection	IP67 waterproof
Housing	Aluminum alloy metal
Cable	3-prong plug with 3.3 ft cable

Our Verdict

The LightingWill 200W LED Driver is a sensible value for anyone needing a weatherproof 24V power source for outdoor LED strips and landscape lights; its 200W capacity, metal housing and auto-protection provide practical safety and performance for most small installations. Buyers who need dimming or absolute long-term reliability in harsher conditions may want a higher-end industrial supply, but for the price this unit balances power and outdoor protection well.

Frequently Asked Questions

Can this power supply be used outdoors exposed to rain?
Yes, the IP67 rating means it is sealed against water and can be used outdoors where it may be exposed to rain and temporary immersion.

Will it run long runs of 24V LED strip?
Yes, with 24V at 8.3A and 200W total capacity it can handle long runs or several strips, but calculate total wattage of LED strips to avoid overload.

Does it support dimming?
No, this is a fixed 24V DC supply and does not include dimming controls; a separate dimmable driver is required for brightness control.