LINOVISION LR1002-1ET POE IP Over Coax Transmitter - Long Reach EoC

In this review the LINOVISION LR1002-1ET is assessed as a focused solution for installers who want to reuse existing coax cable while migrating to IP cameras. The bottom line: this single-port EoC transmitter does one job and does it simply - it sends Ethernet and PoE signals over RG59/RG6 coax up to long runs, letting a paired receiver provide power and network to an IP camera. For anyone upgrading analog CCTV to IP without re-pulling cable, this transmitter is a compact, plug-and-play piece that removes a common barrier to migration.

Key Features

• Ethernet over coax: Converts and transmits IP data over existing coaxial cable so cameras can be moved to IP without new cabling.
• PoE transmission: Supports Power over Ethernet delivery with an 11W load capacity over long coax runs to power cameras and small PoE devices.
• Long reach performance: Provides up to 100 Mbps bandwidth across about 1,000 ft of regular RG59, enabling higher-throughput IP signals on legacy cable.
• Point-to-point MoCA style link: Designed for direct transmitter-to-receiver pairs to carry video, audio, data and control signals reliably over coax.
• Compact, installation friendly: Small footprint (3.1in x 2.0in x 0.9in) and lightweight design fits standard back boxes for neat installs.
• Plug-and-play setup: No configuration required; the transmitter is powered via the receiver side when the receiver is connected to a PoE switch or injector.

Who It's For

The LR1002-1ET is aimed at security installers and system integrators who need a simple way to upgrade an analog CCTV infrastructure to IP without replacing coaxial runs. It is especially useful on sites with long cable runs where running new Ethernet conduit would be disruptive or expensive.

It is not for users who need multipoint network bridging, standalone PoE sourcing at the transmitter end, or more than a single camera per coax run. For multi-drop coax topologies or environments requiring local power at the transmitter, a different extender architecture is preferable.

Pros & Cons

Pros

• Reuses existing RG59/RG6 coax to carry both Ethernet and PoE, saving installation time and cost.
• Delivers consistent 100 Mbps over long runs, adequate for most CCTV IP camera streams.
• Compact size and plug-and-play operation simplify mounting in tight back boxes.
• Works with CCA/CCU cable types, increasing compatibility with common coax varieties.

Cons

• Transmitter is point-to-point only and must be paired with a compatible receiver; it does not function alone.
• PoE load is limited to 11W, which restricts use to lower-power cameras and devices.

Specifications

Product	LR1002-1ET EoC Transmitter (transmitter only)
Transmission	Ethernet and power over coax
Bandwidth	100 Mbps over up to 1,000 ft (regular RG59)
PoE Capacity	11W load capacity over 1,000 ft
Cable Compatibility	Works with CCA/CCU RG59 and RG6
Connection Topology	Point-to-point (paired with receiver)
Size	3.1in x 2.0in x 0.9in

Our Verdict

The LINOVISION LR1002-1ET is a pragmatic, cost-saving choice for installers migrating analog CCTV to IP while keeping coax in place. Its compact form, straightforward pairing with a receiver, and long-reach 100 Mbps link make it good value for single-camera runs that need basic PoE. Choose it when minimal installation fuss and reuse of existing coax are the priorities.

Frequently Asked Questions

Does the transmitter need a local power adapter?
The transmitter side is intended to be powered through the paired receiver when that receiver is connected to a PoE switch or injector, so no local adapter is required for the transmitter.

Can it power any PoE camera?
It supports an 11W PoE load over long coax runs, so it will power many low-power PoE cameras but not higher-draw models that require standard 802.3at or higher wattage.

Will this work with split coax or multi-drop topologies?
No, the device is designed for point-to-point links and expects a one-to-one transmitter-receiver pairing over a single coax run.