meite MT7116LN Pneumatic Upholstery Stapler 22 Gauge Long Nose

In this review the meite MT7116LN Pneumatic Upholstery Stapler is judged as a practical, value-oriented tool for upholsterers and hobbyists who need reach and consistent staple penetration. The bottom line: if you use an air compressor and want a long-nose 22-gauge stapler that accepts 3/8 in crown staples from 1/4 in to 5/8 in, this tool delivers straightforward performance and a useful easy-load magazine for continuous work. Its fixed 1/4 in NPT fitting and recommended 70 - 90 PSI operation make it a reliable choice for shop or home projects when paired with the correct compressor.

Key Features

• Pneumatic power: Requires an air compressor and runs best at the recommended 70 - 90 PSI, providing consistent driving force for upholstery work.
• Standard air inlet: A fixed 1/4 in NPT fitting reduces the chance of air leakage and simplifies hookup to typical compressor hoses.
• Wide fastener compatibility: Accepts 22-gauge, 3/8 in crown 71 series staples from 1/4 in to 5/8 in, allowing use across common upholstery thicknesses.
• Extended reach: The lengthened nose accesses tight corners and hard-to-reach areas that bulkier staplers cannot reach.
• Easy-load magazine: Holds up to 180 staples for sustained work without frequent reloading, helpful for longer projects.
• Complete basic kit: Ships with a hex wrench, instruction manual and exploded parts list for maintenance and parts identification.

Who It's For

The MT7116LN is best for professional upholsterers, furniture restorers, and DIYers who already own or plan to use an air compressor and need a long-nose stapler to reach tight seams and corners. It suits jobs like automotive interior trim, picture framing, and fabric-to-wood fastening where a 3/8 in crown staple is appropriate.

Those who should look elsewhere include users who lack an air compressor or need compatibility with T50 staples, since this model does not accept T50 types. Buyers who require an integrated adjustable air fitting or electronic depth control may prefer a different, higher-end model.

Pros & Cons

Pros

• Good penetration and consistent performance when used at the recommended PSI.
• Long nose design makes it easy to reach tight corners and under trims.
• Large 180-staple magazine reduces reload frequency for continuous projects.
• Standard 1/4 in NPT inlet minimizes air leakage and simplifies hookup.

Cons

• Requires an air compressor (not included), so additional equipment is needed before use.
• Some users report mixed experience with staple driver retraction, which can interrupt workflow in rare cases.

Specifications

Tool type	Pneumatic upholstery stapler
Staple gauge and crown	22-gauge, 3/8 in crown (9 mm)
Acceptable staple lengths	1/4 in to 5/8 in
Compatible series	71 series staples (does not accept T50)
Air inlet	Fixed 1/4 in NPT fitting
Recommended air pressure	70 - 90 PSI
Magazine capacity	Holds 180 staples

Our Verdict

The meite MT7116LN is a practical, affordable pneumatic upholstery stapler for anyone who needs a long-nose tool with good staple penetration and a high-capacity magazine. It represents solid value when paired with an appropriate compressor, but buyers should be aware it only accepts 71 series 22-gauge staples and some users have noted occasional staple retraction issues. Overall, it is a sensible choice for upholstery and trim work when reach and continuous feeding are priorities.

Frequently Asked Questions

Does this stapler include an air compressor?
No. The stapler requires an external air compressor and is recommended to run at 70 - 90 PSI; the compressor is not included.

What staple types will it accept?
It accepts 22-gauge, 3/8 in crown 71 series staples in lengths from 1/4 in to 5/8 in and does not accept T50 staples.

What is included in the package?
Package contents are the MT7116LN stapler, a hexagonal wrench, an instruction manual, and an exploded view with part list; staples are sold separately.