MokerLink IP67 Outdoor 3 Port Gigabit PoE Extender - Rugged Waterproof

In this review the MokerLink IP67 Outdoor 3 Port Gigabit PoE Extender is judged as a focused solution for extending PoE networks outdoors or in harsh indoor spaces. It is best for installers who need a compact, weatherproof device to add two additional PoE-powered endpoints without running new power. The single biggest reason to buy is its IP67 metal housing and waterproof passthrough cap that protect RJ45 connections while providing full IEEE 802.3af/at/bt compatibility up to a 90W output on one port, enabling reliable outdoor camera and access point deployments.

Key Features

• 3 Gigabit PoE Ports: Supplies one PoE input and two PoE outputs at 10/100/1000Mbps to power cameras, APs or phones on the same cable run.
• IP67 Weatherproofing: Metal outdoor case with a waterproof cap lets cables pass through while protecting connectors from dust, rain and snow.
• IEEE 802.3 af/at/bt Support: Auto detects and negotiates power with connected devices and supports up to 120W input and 90W on Out1 for high-power devices.
• Unmanaged Plug & Play: No configuration required; the unit powers devices automatically and supports PoE dog reset for stuck devices.
• Flexible Cable Support: Works with Cat5 or better for 100 Mbps to 150 m and Cat6 or better for 1 Gbps to 100 m, matching common site cabling.
• Wall Mountable Metal Case: Compact rugged housing saves space and can be mounted in garages, attics, warehouses or on exterior walls.

Who It's For

The MokerLink extender is aimed at installers and small IT teams who need a low-cost way to extend PoE coverage outdoors or to remote indoor locations without running AC power. It works well for extending feeds to security cameras, outdoor access points and PoE phones where weatherproofing and gigabit speeds matter.

It is not the right choice for users who need managed switching features, VLANs, or detailed power reporting; this is an unmanaged passthrough repeater designed for simplicity rather than advanced network control.

Pros & Cons

Pros

• Rugged IP67 metal enclosure provides reliable protection for outdoor RJ45 installations.
• Supports IEEE 802.3af/at/bt with high-power output on Out1 to run demanding PoE devices.
• Gigabit capable ports and cable distance guidance allow flexible placement with common UTP cabling.
• Plug-and-play operation and PoE dog auto reset simplify field installs and troubleshooting.

Cons

• Unmanaged design means no VLANs, QoS or port-level configuration for advanced networks.
• Cable routing requires passing the network cable through the waterproof cap which adds a small extra step during installation.

Specifications

Ports	3 Gigabit PoE ports (1 In, 2 Out)
Speed	10/100/1000Mbps
PoE Standard	IEEE 802.3af/at/bt
Power Output	Input max 120W; Out1 max 90W; Out2 max 30W
PoE Voltage	44-57 Vdc
Enclosure	IP67 metal waterproof housing with waterproof cap
Mounting	Wall mountable

Our Verdict

The MokerLink IP67 3 Port Gigabit PoE Extender is a practical, value-oriented device for extending PoE to outdoor cameras and access points without new power runs. Its rugged waterproof metal case, IEEE 802.3af/at/bt support and plug-and-play operation make it a smart pick for installers who need reliable outdoor passthrough power, while those requiring managed switch features should consider a different product.

Frequently Asked Questions

Can this extender be used outdoors without additional enclosures?
Yes, the IP67 metal housing and waterproof cap are designed for direct outdoor use and protect RJ45 connections from rain and dust.

Does it need an external power adapter?
No, it is powered by PoE input and does not require a separate AC adapter; it draws power from the upstream PoE source.

What cable types and distances are supported?
Use Cat5 or later for 100BASE-TX up to 150 m and Cat6 or later for 1000BASE-T up to 100 m as recommended for gigabit performance.