Skip to product information
1 of 1

NetPower1800 PoE + 1800Mbps PLC Adapter - Power and Data Over One

NetPower1800 PoE + 1800Mbps PLC Adapter - Power and Data Over One

Regular price $49.95 USD

Price subject to change. Tap below for current.

In this review the NetPower1800 is examined for installers and small network operators who need both reliable Power over Ethernet and high-speed powerline networking without running new cabling. The bottom line: it pairs carrier-grade 30W 802.3af/at PoE with an AV2 MIMO PLC engine that advertises up to 1800Mbit/sec (real-world network speeds up to roughly 500Mbps), delivering data and DC power over a single Cat5e lead up to 328 ft. For projects that require powering IP cameras, WiFi access points or small cells where AC outlets are available, the NetPower1800 simplifies deployment and reduces labor.

Key Features

  • Combined PoE and PLC: Provides 30W 802.3at/af PoE and AV2 MIMO powerline communication in the same compact adapter so devices get power and network over one Cat5e cable.
  • High PLC throughput: Uses an 1800Mbit/sec AV2 MIMO PLC engine to support up to about 500Mbps of usable network speed for video streams and data transfer.
  • Long reach over Cat5e: Delivers gigabit Ethernet and DC power over a single Cat5e run up to 328 ft, reducing the need to run separate power and data cabling.
  • Safe for mixed equipment: Includes short-circuit protection that helps keep non-PoE devices safe if they are accidentally connected to the PoE port.
  • Easy installation: Simple plug-and-play design with AC power cord and ethernet cord strain security to cut down on accidental disconnection during installations.
  • Kit option available: Requires a NetSocket1800AM at the router or gateway to reach the internet, and the NetPower1800 is offered pre-kitted with that unit for plug-and-play network setup.

Who It's For

The NetPower1800 is aimed at security installers, small cell and hospitality network teams, and IT pros who need to power and connect IP cameras, WiFi access points, VoIP phones, LED lighting controllers, or small LTE cells without running new AC circuits. Its combination of PoE and PLC makes it particularly useful in retrofit situations where AC outlets exist but structured cabling is limited.

Those who should look elsewhere include sites that need guaranteed multi-gigabit backhaul between locations or pure long-distance fiber runs; the NetPower1800 is a practical solution for up to roughly 500Mbps real-world throughput but not a substitute for dedicated fiber or multi-gig wired trunks.

Pros & Cons

Pros

  • Combines 30W 802.3af/at PoE and PLC so a single Cat5e carry both power and network.
  • AV2 MIMO PLC technology delivers up to 1800Mbit/sec link capability, supporting heavy video and data use.
  • Practical for retrofits and short runs up to 328 ft where AC outlets are available, saving installation time and cost.
  • Short-circuit protection and secure cord mounting reduce accidental outages and protect equipment.

Cons

  • Advertised 1800Mbit/sec is the PLC link rating; expect up to about 500Mbps of actual network speed in real deployments.
  • Requires a matching NetSocket1800AM at the gateway to establish internet connectivity, which adds a required component to the system.

Specifications

Product NetPower1800 PoE + PLC adapter
PoE 30W 802.3af/at
PLC Standard AV2 MIMO, 1800Mbit/sec link
Expected network speed Up to ~500Mbps actual
Cable Single Cat5e for data and power up to 328 ft
Required companion NetSocket1800AM at router/gateway
Protection Short-circuit protection on PoE port

Our Verdict

The NetPower1800 is a smart, cost-effective choice for installers who need to power and network edge devices without running separate power and data cables. It delivers carrier-grade PoE and a high-capacity AV2 MIMO PLC link that supports demanding video and wireless endpoints, and it is good value when paired with the required NetSocket1800AM. Choose it for retrofits and short campus runs where reducing labor and cable complexity matters.

Frequently Asked Questions

Do I need another unit at the router?
Yes. The NetPower1800 requires an LEA Networks NetSocket1800AM at the router or gateway to establish PLC communication to the internet.

Can non-PoE devices be connected?
Yes. Non-PoE equipment can be used with an off-the-shelf PoE power splitter, and the adapter includes short-circuit protection to guard against accidental connections.

How fast will the connection be?
The PLC link is rated up to 1800Mbit/sec, but expect real-world network speeds up to about 500Mbps depending on environment.

Editor's Take

GearMustHave editorial rating: 4.2 out of 5. GearMustHave Editorial Rating

The NetPower1800 pairs 30W 802.3af/at PoE with an AV2 MIMO PLC link delivering up to 1800Mbit/sec link capacity (about 500Mbps real-world), making it a cost-effective solution for powering and networking IP cameras, access points and small cells where AC outlets exist and running new cabling is impractical.

View full details
NetPower1800 PoE + 1800Mbps PLC Adapter - Power and Data Over One
NetPower1800 PoE + 1800Mbps PLC Adapter - Power and Data Over One
Regular price $49.95 USD
CHECK AVAILABILITY ➤

Recently viewed