NetPower1800 PoE/PLC + NetSocket1800 PLC Kit - Powerline 30W PoE

In this review of the NetPower1800 PoE/PLC + NetSocket1800 PLC Kit, the reviewer focuses on why this pair is a straightforward solution when you need ethernet and power delivered to remote network devices without running new cabling. The kit pairs a HomePlug AV2 MIMO PowerLine adapter with a companion unit that adds a built-in 30W 802.3af/at Power over Ethernet output, making it ideal where a reliable network link and PoE are required together. For home or small office installs that already have decent AC wiring, this kit reliably converts wall outlets into network and powered device endpoints.

Key Features

• 1800Mbps HPAV2 throughput: The NetSocket1800AM supports HomePlug AV2 MIMO technology with up to 1800Mbits/sec physical throughput to maximize PLC performance over existing AC wiring.
• Practical network speeds: Measured network throughput up to about 500Mbps for typical data needs such as video streams and large file transfers across the home or office.
• Built-in 30W PoE: The NetPower1800AM supplies 30W 802.3af/at power on its Ethernet port, allowing direct connection and power for IP cameras, WiFi access points or VoIP phones.
• Long-reach over wiring: Designed to carry ethernet up to roughly 1000ft using existing AC electrical circuits, avoiding new cable runs.
• Pass-through convenience: The NetSocket1800AM includes a filtered pass-through outlet to preserve an available wall socket while reducing electrical noise for better PLC signals.
• Safety and design: Both units are UL Listed and are designed in France and the USA for assured safety and performance.

Who It's For

The kit is aimed at homeowners, installers and small office users who need a simple way to deploy networked, powered devices in locations without nearby Ethernet drops. It works well for remote IP cameras, ceiling WiFi access points or VoIP phones where 30W PoE is sufficient and the building wiring is in good condition.

It may not be the best choice for sites with very noisy or degraded electrical systems, multi-panel commercial installations with separate circuits, or where the absolute highest, low-latency links are required; in those cases fiber, new Ethernet cabling, or managed wireless backhaul should be considered instead.

Pros & Cons

Pros

• Delivers both Ethernet and 30W PoE to remote outlets without new cabling.
• HomePlug AV2 MIMO support provides strong physical throughput up to 1800Mbits/sec for better real-world speeds.
• Pass-through filtered outlet preserves convenience and improves PLC signal quality.
• UL Listed for safety, with design input from France and the USA.

Cons

• Real-world network throughput is typically up to about 500Mbps, which is below the physical headline rate and may limit some heavy multi-user scenarios.
• Performance depends on the quality and routing of the AC wiring, so results can vary between homes and offices.

Specifications

Our Verdict

The NetPower1800 PoE/PLC + NetSocket1800 PLC Kit is a practical, good-value option when you need both a reliable network link and PoE without running Ethernet cable. It is especially useful for home and small office installs with decent AC wiring and for powering devices like IP cameras and access points. While real-world throughput is lower than the physical maximum, the convenience, pass-through outlet and UL listing make it a solid choice for most retrofit deployments.

Frequently Asked Questions

Can this kit power an IP camera directly?
Yes. The NetPower1800AM provides 30W 802.3af/at PoE on its Ethernet port, sufficient for most indoor IP cameras and many access points.

Do I need to run any extra cables to use it?
No. The NetSocket1800AM plugs into your router and the NetPower1800AM plugs into the remote outlet; the kit uses existing AC wiring to carry ethernet and power to the remote device.

Will it work in any house wiring?
It relies on the home or office AC electrical system; performance is best on reasonably modern, single-panel wiring and can vary if circuits are noisy or separated.