Outdoor Cat 6 Ethernet Cable 1000ft - Direct Burial, PoE++ Ready

In this review the focus is on a heavy-duty, long-run network cable for outdoor and utility installations. The Outdoor Cat 6 Ethernet Cable 1000ft earns recommendation for installers and system builders who need a single, long continuous run that supports both data and power delivery: its standout is the combination of 23 AWG solid bare copper conductors and a gel-filled, UV-resistant jacket that allow reliable runs outdoors and underground while supporting up to 100W via PoE++.

Key Features

• 23 AWG Solid Copper: Solid bare copper conductors provide higher conductivity and tensile strength for stable transmission over long runs.
• High Bandwidth: The cable is tested to 550 MHz so it supports 1 and 5 Gigabit to 328 ft and 10 Gigabit to 165 ft depending on installation.
• Direct Burial Rated: A gel-filled core and UV-resistant jacket make the cable suitable for direct burial or running in conduit in outdoor environments.
• PoE Support: Supports PoE/PoE+/PoE++ (IEEE 802.3af/at/bt) including 4PPoE up to 100W for powering cameras and access points.
• Hassle-Free Packaging: Supplied on a wooden axle in a pre-spooled 1000 ft box for easy pulls and reduced tangling on job sites.
• Standards & Certification: UL-certified and built to meet or exceed ANSI/TIA-568B-C.2 standards with RoHS compliance.

Who It's For

This cable is aimed at network installers, CCTV and IP camera technicians, and property owners who need an uninterrupted long run outdoors or underground and want the safety of solid copper and a waterproof jacket. The combination of direct burial rating and PoE++ support makes it particularly useful when powering remote devices without separate power runs.

Users who need short patch runs inside an office or who require shielded cable for high EMI environments should look elsewhere; this is an unshielded UTP cable optimized for outdoor durability and long-distance simplicity rather than in-rack patching or electrically noisy industrial spaces.

Pros & Cons

Pros

• Solid 23 AWG bare copper delivers reliable signal and power for long outdoor runs.
• Direct burial, gel-filled core and UV-resistant jacket resist moisture, soil and sunlight.
• Supports high bandwidth and PoE++ up to 100W for modern devices like cameras and access points.
• Pre-spooled 1000 ft wooden axle box simplifies installation and pull management.

Cons

• Unshielded design may not be ideal in high EMI industrial locations where shielded cable is preferred.
• 10 Gigabit full reach is limited to shorter runs (around 165 ft) compared with shorter-format Cat6 installations.

Specifications

Length	1000 ft (305 m)
Conductor	23 AWG solid bare copper
Pairs	4 pairs (8 conductors)
Bandwidth	Tested up to 550 MHz
PoE	Supports PoE/PoE+/PoE++ (4PPoE) up to 100W
Outdoor rating	Direct burial, gel-filled core, UV-resistant jacket
Certifications	UL certified, ANSI/TIA-568B-C.2 compliant, RoHS

Our Verdict

For installers who need a single, long outdoor run that combines data and power, this Outdoor Cat 6 1000 ft cable is a practical, cost-effective choice. The solid 23 AWG copper, waterproof gel core and proven PoE++ capability make it especially good for CCTV and remote network devices, while the pre-spooled box saves time on the job site and reduces waste.

Frequently Asked Questions

Can this cable be buried directly in the ground?
Yes, the gel-filled core and UV-resistant jacket are designed for direct burial or running in conduit for outdoor installations.

Will it power PoE devices like IP cameras?
Yes, it supports PoE/PoE+/PoE++ including 4PPoE up to 100W, suitable for many IP cameras and access points depending on device requirements.

How far will it support 10 Gigabit?
10 Gigabit performance is expected to reach around 165 ft depending on installation conditions; longer runs are best for 1 or 5 Gigabit speeds.