PC-Concrete Epoxy Adhesive Paste Cartridge Kit - Anchoring & Repair

In this review the PC-Concrete epoxy adhesive paste kit is judged on reliability and versatility for concrete anchoring and crack repair. The kit is aimed at contractors, maintenance crews, and skilled DIYers who need a high-strength, moisture-tolerant epoxy that bonds like steel and holds threaded rods, bolts, and dowels in place. The single biggest reason to buy is its practical kit format: a two-part, high-modulus epoxy in an 8.6 oz cartridge paired with a 250 ml steel dispensing gun that simplifies mixing and application in damp or vertical conditions.

Key Features

• Two-part epoxy: The 1:1 ratio, 100 percent solids formulation gives a structural high-strength bond suitable for anchoring and permanent concrete repair.
• Kit with dispensing gun: Includes an 8.6 oz cartridge and a 250 ml steel caulking gun so the product is ready to apply without sourcing a separate dispenser.
• Moisture-insensitive paste: High-tack paste resists moisture so it can be applied in damp environments and on vertical surfaces without sagging.
• Wide temperature range: Usable from 35 to 115 degrees F with a service range to -20 to 115 degrees F, making it suitable for indoor and outdoor work.
• Work and cure times: Provides about 20 minutes of work time and reaches handling cure in about 4 hours at 75 degrees F, allowing time for proper placement and cleanup.

Who It's For

The kit is best for professional contractors, trade installers, and experienced DIYers who need a reliable epoxy for anchoring threaded rods, bolts, dowels, and for filling and repairing cracks in concrete, grout-filled block, and unreinforced masonry. Its high heat deflection and structural properties make it a solid choice where long-term strength and resistance to environmental moisture matter.

Those who should look elsewhere include users who need large-volume epoxy for broad surface resurfacing or those who require a fast-setting product for immediate load-bearing in cold conditions below the stated application range. If a cartridge dispenser is not desired, bulk-packed epoxy options may be more economical for very large projects.

Pros & Cons

Pros

• Strong structural bond that customers describe as comparable to steel for anchoring applications.
• Included steel dispensing gun and cartridge make mixing and outlet control straightforward on site.
• Moisture-insensitive and high-tack paste allows vertical and damp-environment application.

Cons

• The kit is a limited single-cartridge size, so multiple cartridges are needed for larger jobs.
• Some users report handling or minor leakage of the white component in the dispenser, so careful storage and handling are advised.

Specifications

Product form	Two-part epoxy adhesive paste
Kit contents	8.6 oz cartridge of epoxy plus 250 ml steel dispensing gun
Mix ratio	1:1 by volume
Working time	Approximately 20 minutes at 75 degrees F
Cure time	Approximately 4 hours at 75 degrees F
Application temperature	35 to 115 degrees F
Service temperature	-20 to 115 degrees F

Our Verdict

The PC-Concrete cartridge kit is a dependable, purpose-built solution for anchoring and targeted concrete repair where high strength and moisture tolerance are required. Professionals and experienced DIY users will appreciate the included steel gun and the epoxy's long working time; it represents good value for repair and anchoring tasks where structural integrity and ease of application matter most.

Frequently Asked Questions

Can this be used in damp or wet concrete?
Yes. The product is moisture-insensitive and formulated as a high-tack paste for application in damp environments.

How long until the anchor can be loaded?
At 75 degrees F the epoxy cures to handling strength in about 4 hours; allow full cure per project requirements before applying full load.

Is the dispenser included?
Yes. The kit includes an 8.6 oz cartridge of epoxy plus a 250 ml steel dispensing caulking gun for mixing and application.