POE Ethernet Splitter 1 to 3 Gigabit - No Power Supply Required

In this review of the POE Ethernet Splitter 1 to 3 Gigabit, the bottom line is simple: it is for installers and hobbyists who need to extend and split PoE feeds without running separate power lines. The reviewer found it most useful when paired with a PoE switch to power multiple POE IP cameras and devices over long runs while preserving full 1000Mbps throughput. The ability to cascade units and the option to accept DC or PoE power make it a practical tool for cleaner wiring and fewer power outlets on site.

Key Features

• 1 to 3 Gigabit Split: Splits a single incoming Ethernet/PoE line into three Gigabit outputs so multiple POE devices can be deployed from one feed.
• No Power Supply Required (with PoE): When connected to a PoE switch the device requires no external adapter, simplifying installation and reducing cable clutter.
• 60W High-power Output: Offers two power modes (DC adapter or PoE) and up to 60W output to supply power-hungry POE devices reliably.
• 200m Long-distance Transmission: Supports runs up to 200m (656ft) while maintaining 1000Mbps, useful for distant cameras and remote endpoints.
• Unlimited Cascading: Can be daisy-chained with other splitters for expanded deployments, enabling cleaner wiring across multiple devices.

Who It's For

The splitter is aimed at small system installers, DIY security camera users, and audio/VoIP setups that need to power several POE endpoints from a single switch or feed. It particularly suits projects where running AC power to each device is impractical and where maintaining Gigabit speeds matters.

Those who should look elsewhere include users who need managed switching features, VLAN tagging or PoE power negotiation intelligence; this unit is a passive split/delivery device and not a managed switch. Also, if a deployment relies on standard non-PoE switches and no DC adapters are available, the required 48V adapter must be added at the final splitter.

Pros & Cons

Pros

• Enables multiple PoE devices from a single feed while keeping full 1000Mbps throughput on connected ports.
• Flexible power options with PoE operation or external DC power, and a 60W output to support power-hungry devices.
• Supports long runs up to 200m, useful for remote cameras and networked devices without signal loss.
• Solid build quality reported by customers and straightforward wiring for daisy-chaining.

Cons

• Connection strength has mixed reports; some users experienced intermittent connectivity on both sides when not configured or cabled correctly.
• When used without a PoE source it requires a 48V DC 1A adapter (or 5V 1A for plain LAN mode), which must be purchased separately.

Specifications

Product Type	PoE Ethernet Splitter 1 to 3
Data Rate	1000Mbps (Gigabit)
Power Output	60W high-power output
Power Modes	PoE input or DC adapter (48V recommended)
Max Transmission	200m (656ft) at full 1000Mbps
Cable Compatibility	Cat5e/6/7/8

Our Verdict

The POE Ethernet Splitter 1 to 3 Gigabit is a practical, cost-effective choice for powering multiple POE cameras or devices from a single feed while preserving Gigabit speed. Installers and DIY users will value the cascading capability and flexible power modes, though buyers should plan for the required DC adapter in non-PoE setups. It delivers good value where simple, reliable PoE splitting and long runs are needed.

Frequently Asked Questions

Can this run without a PoE switch?
If using it as a normal LAN expander without PoE, you must plug in a 5V 1A adapter; for powering devices from a non-PoE switch you need a 48V DC 1A adapter at the final splitter.

How far can it carry signal at Gigabit speed?
The unit supports transmission up to 200m (656ft) while maintaining 1000Mbps when used with compatible cabling.

Do I need a special cable?
Use Cat5e or better (Cat6, Cat7, Cat8) to ensure Gigabit performance and reliable PoE delivery.