REOLINK PoE Switch 8 PoE + 2 Gigabit Uplink - Reliable Power for IP

In this review of the REOLINK PoE Switch RLA-PS1 the bottom line is simple: it is a straightforward, practical PoE power solution for small to medium surveillance installations that need reliable power and easy setup. The switch is aimed at installers or homeowners using PoE cameras or a REOLINK NVR who want up to eight powered ports and two gigabit uplinks without complicated configuration. The biggest reason to buy is its combination of an industry-standard IEEE802.3af/at PoE implementation and a sensible 120W power budget that keeps cameras running with minimal fuss.

Key Features

• 8 PoE ports: Provides 8 10/100Mbps PoE ports that deliver up to 30W per port for most modern IP cameras, simplifying cabling by carrying power and data on one cable.
• 2 Gigabit uplinks: Two 10/100/1000Mbps uplink ports allow connection to an NVR or network with full gigabit bandwidth where needed.
• 120W total power budget: The switch can supply up to 120W across all PoE ports, enough to power multiple cameras without an external power injector.
• Intelligent power management: When allocated power exceeds 120W the switch will disable lower priority ports until total draw falls below the budget, protecting devices from overload.
• Auto detection of devices: The unit detects whether a connected device requires PoE and will not power non-PoE devices, preventing accidental damage.
• Flexible installation: Metal casing and desktop or wall-mount options let the switch be installed in varied environments near an NVR or router.

Who It's For

The RLA-PS1 is best for homeowners, small businesses, or installers using REOLINK PoE cameras and a dedicated NVR who want a plug-and-play power solution with a clear power budget. It particularly suits setups where up to eight cameras are required and a single device to handle power and local switching reduces clutter and cabling.

People who need managed switching features, per-port VLANs, PoE scheduling, or very high port counts should look elsewhere; this is an unmanaged, powering-first device intended for straightforward surveillance deployments rather than advanced network segmentation.

Pros & Cons

Pros

• Reliable PoE delivery up to 30W per port, with a 120W pool to run multiple cameras.
• Solid metal build and wall or desktop mounting options for flexible placement.
• Simple plug-and-play operation and automatic PoE detection for easy setup.
• Two gigabit uplink ports to connect an NVR or uplink to a higher-speed LAN segment.

Cons

• Unmanaged feature set; no advanced network management for users who require VLANs or QoS controls.
• Some users reported mixed experiences with specific camera models on uplink compatibility, so testing with your camera model is advised.

Specifications

Ports	8 PoE (10/100Mbps) + 2 Gigabit uplink (10/100/1000Mbps)
PoE Standard	IEEE802.3af/at
Max PoE Power per Port	Up to 30W
Total Power Budget	120W
Mounting	Desktop or wall mount
Case	Metal casing

Our Verdict

The REOLINK RLA-PS1 is a practical, no-nonsense PoE switch for camera deployments where simple, reliable power delivery matters more than advanced network management. It offers good build quality, easy installation, and a helpful power-management mechanism, making it a good value for homeowners and small business users who pair it with a REOLINK NVR or PoE cameras.

Frequently Asked Questions

Can this switch power eight cameras at once?
Yes - it supports up to eight PoE devices but total draw must not exceed the 120W power budget; ports over budget will be disabled by priority.

Will it damage non-PoE devices if connected?
No - the switch automatically detects whether a device needs PoE and will not supply power to non-PoE equipment.

Can it be mounted near an NVR?
Yes - the metal casing and included options allow desktop placement or wall mounting for close connection to an NVR or network closet.