RG6 Outdoor Quad Shield Coaxial Cable, 1000ft - Direct Burial

In this review the RG6 Outdoor Quad Shield Coaxial Cable is presented for homeowners, installers, and hobbyists who need a reliable, long run outdoor coax solution. The single biggest reason to buy is the cable's combination of a solid 18AWG bare copper conductor and quad shielding, which delivers better signal quality and voltage delivery to satellite LNBs than typical copper-clad alternatives. It is sold on a pre-spooled reel and rated for direct burial, so it is aimed at anyone installing long cable runs outdoors who wants a durable, sweep-tested RG6 that supports signals up to 3GHz.

Key Features

• Quad shielding: Dual foil plus two aluminum braid layers provide broad protection against interference for clear TV and data signals up to 3GHz.
• 18AWG bare copper conductor: A solid copper core improves conductivity and voltage delivery for satellite LNBs compared with copper-clad steel.
• Direct burial jacket: Weather-resistant PE outer jacket stands up to sunlight, moisture, dirt and snow so the cable can be installed in the ground or in conduit.
• Pre-spooled EZ Pull Reel: Cable arrives on a tangle-free reel with sequential footage markings every 2 ft to speed pulls and track remaining length.
• Tested to 3GHz: Sweep tested and ANSI/TIA compliant for CATV and digital video uses, providing documented performance for demanding installations.

Who It's For

This cable suits residential and small commercial users running long outdoor coax runs for cable TV, HDTV, satellite installations, modems and higher-bandwidth SDI signals. Installers who need reliable voltage to the LNB will appreciate the 18AWG solid copper conductor that performs better than CCS in that role.

It is less appropriate for only short interior runs where plenum or in-wall rated cable is required, or for those who need a colored jacket other than black. If a lighter gauge or shield style is specifically required by a system, check compatibility before buying.

Pros & Cons

Pros

• Robust quad shielding reduces interference for stable picture and data up to 3GHz.
• Solid 18AWG bare copper conductor provides better conductivity and LNB voltage delivery than copper-clad options.
• Durable PE jacket and direct burial rating make it a true outdoor cable for ground or conduit runs.
• Convenient pre-spooled reel and sequential footage markings streamline long pulls.

Cons

• Comes only on a black jacket and may not meet specialized interior plenum requirements where different ratings are needed.
• Some users note mixed feedback on copper shielding handling in tight bends, so care is required during installation.

Specifications

Cable type	RG6, quad shield
Length	1000 ft
Impedance	75 Ohm
Conductor	18 AWG solid bare copper
Shielding	60% + 40% aluminum braid with dual 100% foil
Jacket	UV resistant polyethylene (direct burial)
Tested frequency	Up to 3 GHz sweep tested

Our Verdict

The RG6 Outdoor Quad Shield Cable delivers strong value for anyone running long outdoor coax for TV, satellite or broadband because of its solid 18AWG copper core, multi-layer shielding and direct burial jacket. It is a practical, well-tested choice for installers who need reliable signal and voltage delivery over extended runs, and the pre-spooled reel makes installation noticeably easier.

Frequently Asked Questions

Can this cable be buried directly in the ground?
Yes, the cable has a weather-resistant PE jacket and is rated for direct burial or placement in conduit.

Is the conductor solid copper or copper-clad?
The conductor is an 18 AWG solid bare copper core, preferred for satellite LNB voltage delivery compared with copper-clad steel.

What signals will this cable support?
It is suitable for cable TV, HDTV, satellite, modem connections and SDI video up to 3 GHz, as it has been sweep tested to that frequency.