Romex SIMpull Solid Indoor 14/2 W/G Cable 50ft - Easier Pulling

In this review of the Romex SIMpull 14/2 wG 50ft coil the bottom line is simple: it is a practical, no-nonsense choice for most residential branch-circuit work where ease of routing matters. The reviewer found the patented SIMpull cable jacket noticeably easier to pull and strip compared with standard NM-B sheathing, making it a time saver for runs through studs and short attic pulls. For homeowners and electricians doing lighting, outlets, or switches in dry, above-ground locations, this coil delivers predictable performance and straightforward handling.

Key Features

• SIMpull jacket: The patented coated jacket reduces friction during pulling, so longer runs through stud bays and attic spaces are quicker and less tedious.
• NM-B construction: Designed for residential branch circuits, the cable is suitable for outlets, switches, and other common home loads in normally dry locations.
• 50ft coil length: A compact coil that is convenient for short runs and small projects without excess bulk to manage on site.
• 600 volt rating: A 600 V insulation rating provides the standard electrical capacity expected for building wire used in household circuits.
• Air-void routing allowed: The cable may be routed in air voids of masonry block or tile walls provided those locations are not wet or damp.

Who It's For

The Romex SIMpull 14/2 wG 50ft coil is aimed at electricians, DIY remodelers, and homeowners doing routine interior wiring for circuits feeding outlets, switches, and lighting fixtures. Its ease of pulling and stripability make it a good match when working in finished framing or installing LED downlights where access is limited.

It is not intended for use in wet locations, underground direct burial without conduit, or installations requiring armored or conduit-protected cable. For commercial environments or runs exposed to moisture, users should select a cable rated for those conditions instead.

Pros & Cons

Pros

• Patented SIMpull jacket improves ease of pulling and reduces installation fatigue on short to mid-length runs.
• Suitable for standard residential branch circuits like outlets and switches, making it versatile for home projects.
• Good flexibility and ease of cutting and stripping, which customers report helps speed installations.

Cons

• Limited to dry, above-ground locations and not suitable where wet or buried installations are required.
• 50ft coil is helpful for small runs but may be short for longer circuits, requiring additional splices or longer reels.

Specifications

Our Verdict

The Romex SIMpull 14/2 wG 50ft coil is a practical and cost-effective choice for residential wiring where ease of pulling and stripability matter. Installers get a durable NM-B cable with a lower-friction jacket that speeds routine runs; it represents good value for typical home projects so long as the installation is dry and above ground.

Frequently Asked Questions

Can this cable be used outdoors or underground?
No. This NM-B cable is rated for indoor, dry locations only and should not be used for direct burial or in wet locations.

Is the SIMpull jacket actually easier to pull?
Yes. The patented SIMpull coating reduces friction and customers report easier pulling through studs and conduit-free runs.

Can this be used for LED downlight circuits?
Yes. It is commonly used for lighting branch circuits and works well for LED downlights when installed in dry, above-ground locations.