S&F STEAD & FAST HSS Annular Cutter 13/16 in 2 in Depth - Durable Cut

In this review the S&F STEAD & FAST 13/16 in annular cutter is evaluated for metalworkers who need fast, clean holemaking with a magnetic drill. The bottom line: this single-piece HSS annular cutter is best for fabricators and maintenance techs who value a sharp, CNC-machined edge and a robust 3/4 in Weldon shank for secure clamping. It delivers smooth, reamed, burr-free holes when used with steady pressure and a compatible mag drill, but requires the correct arbor for drill press use and shows mixed reports on long-term sharpness.

Key Features

• M2AL HSS construction: Provides wear resistance and higher service life compared with ordinary tool steel, making it suited for repeated steel cutting.
• 13/16 in outside diameter: Cuts a precise hole size useful for through-holes in structural and plate work without reaming afterward.
• 2 in cutting depth: Allows drilling through thicker plate and multiple stacked materials in a single pass for faster workflow.
• 3/4 in Weldon shank: Two-flat shank ensures secure clamping in mag drill arbors and keeps the cutter concentric under load.
• CNC-machined edge finish: Produces smooth, burr-free holes that reduce secondary finishing time.
• Includes pilot pin and plastic case: Pilot pin simplifies chip ejection and the case protects the cutter between jobs.

Who It's For

This cutter suits industrial tradespeople, fabricators, and site maintenance crews who use magnetic drill presses from brands such as Alfra, BDS, DeWalt, Fein, Euroboor, Hougen and Ruko and need a reliable HSS solution for steel work. The precise CNC edge and Weldon shank are practical for repeatable production or repair tasks where hole quality matters.

Those working only on a standard drill press should note an arbor is required for 2 in annular cutters; the arbor is not included, so hobbyists without the proper arbor or those who need greater carbide wear life may want to consider alternatives. Heavy production users who reported variable durability should monitor tool life depending on material and feed technique.

Pros & Cons

Pros

• Well-machined HSS body gives clean, burr-free holes and easy chip removal when used with steady pressure.
• Sturdy 3/4 in Weldon shank keeps the cutter secure in mag drill arbors, reducing runout and vibration.
• Comes with a pilot pin and protective plastic case for convenience and safe storage between uses.
• Compatible with many popular mag drill brands, making it a versatile addition to a shop kit.

Cons

• Users report mixed long-term sharpness; some find performance drops after multiple holes, so frequent resharpening or replacement may be needed.
• No arbor included for drill press mounting, so bench users must purchase a compatible arbor separately.

Specifications

Brand	S&F STEAD & FAST
Material	M2AL high speed steel (HSS)
Outside diameter	13/16 in
Cutting depth	2 in
Shank	3/4 in Weldon shank (two flats)
Includes	One annular cutter, one pilot pin, plastic case
Compatibility	Mag drills: Alfra, BDS, DeWalt, Fein, Euroboor, Hougen, Ruko

Our Verdict

The S&F STEAD & FAST 13/16 in HSS annular cutter is a solid choice for tradespeople who want clean, accurate holes from a HSS tool with a dependable Weldon shank. It represents good value for occasional to moderate use when sharpness is maintained and the correct arbor is available. For heavy continuous production where ultimate longevity is critical, users should plan for resharpening or replacement.

Frequently Asked Questions

Can I use this on a drill press?
Yes, but you must have the correct annular cutter arbor for a 2 in cutter; an arbor is not included in the pack.

Will this fit my mag drill?
The cutter uses a 3/4 in Weldon shank and is compatible with many mag drill brands listed by the manufacturer when the machine accepts that shank standard.

How long will the cutter stay sharp?
Durability varies by material and technique; customers report mixed sharpness over time, so expect to resharpen or replace after repeated heavy use.