Space Pi Filament Dryer Plus Dual Spool - Fast, Even Drying

In this review the Creality Space Pi Filament Dryer Plus is evaluated for hobbyists and small shops that need reliable filament conditioning before prints. The bottom line: it is best for users who store multiple spools and want a hassle-free way to remove moisture, thanks to the one-key drying presets and visible monitoring. Setup is straightforward and the unit's combination of a PTC heater and built-in fan delivers even circulation, making it a practical addition for anyone chasing consistent print quality.

Key Features

• One-Key Settings: Pre-configured temperature and drying time for up to 12 filament types simplifies setup and reduces guesswork for different materials.
• Adjustable Temperature: Temperature control from 45C to 70C lets users fine tune drying for sensitive or heat-tolerant filaments.
• 360 Hot-Air Circulation: An 80W PTC heater plus a built-in fan provides uniform airflow to remove moisture evenly across two spools.
• 48-Hour Timer: Drying time adjustable from 0 to 48 hours ensures thorough moisture removal for larger or wetter spools.
• Real-Time Monitoring: The 4 in LCD touch screen displays temperature and humidity so users can track filament condition without opening the box.
• Power-Off Memory: Automatic memory of previous settings prevents reconfiguration after power interruptions.

Who It's For

The Space Pi Filament Dryer Plus is aimed at desktop manufacturers, serious hobbyists, and small print shops that use a variety of materials such as PLA, PETG, ABS, Nylon and composites and need dependable drying for two spools at once. The clear display and one-key presets make it useful for makers who want consistency without manual trial and error.

It is less suitable for very large industrial filament stores or users who need more than two spools dried simultaneously; those operations will require larger-capacity solutions. Casual users who rarely print or only print with filament kept perfectly dry may find the feature set more than they need.

Pros & Cons

Pros

• Even drying from 360 hot-air circulation improves print reliability across spool cores and outer layers.
• Convenient one-key drying presets and adjustable 45C-70C temperature range make material setup fast and repeatable.
• Clear 4 in LCD touch screen with humidity and temperature readout allows continuous monitoring without interrupting the cycle.
• Power-off memory adds practical resilience against interruptions during long drying runs.

Cons

• Capacity limited to two spools, so it is not ideal for high-volume or multi-coil inventory management.
• Input voltage listed at 110V 50/60Hz in the specification may require verification for regions with different mains standards.

Specifications

Our Verdict

The Space Pi Filament Dryer Plus is a practical, well-built choice for makers who need reliable drying for two spools and clear status feedback. Its combination of preset drying modes, 360-degree airflow, and real-time humidity readout delivers better filament consistency and reduces print failures, making it good value for small shops and dedicated hobbyists.

Frequently Asked Questions

Can it dry different filament types at once?
Yes, it supports multiple filament types and the presets cover up to 12 materials, but best results are achieved when similar materials and moisture levels are run together.

Does the display show humidity during a cycle?
Yes, the 4 in LCD touch screen displays real-time humidity and temperature so you can monitor conditions without opening the box.

Will it remember settings after a power cut?
Yes, the unit has a power-off memory function that restores previous settings after power is restored.