TotalBilge Epoxy Bilge Paint Quart (Gray) - Tough Waterproof Finish

In this review the TotalBilge epoxy bilge paint is evaluated for boat owners who need a tough, easy-to-clean coating for bilges, engine rooms and lockers; the single biggest reason to buy is its chemical- and oil-resistant, rock-hard finish that protects vulnerable areas from staining and prolonged damage. The reviewer tested application options and found the product straightforward to brush, roll or spray onto prepared fiberglass, wood and metal, and observed that the glossy surface makes leaks and dropped items easier to spot while resisting grease and solvents.

Key Features

• Waterproof, chemical-resistant finish: The epoxy alkyd formulation resists diesel, engine oil, acids, antifreeze and many solvents so bilge surfaces stay protected from staining and corrosion.
• Hard, durable gloss: The high-gloss, rock-hard coating stands up to abrasion and repeated contact without cracking or peeling, keeping bilges easier to clean.
• Multiple application methods: Can be applied by brush, roll or spray, allowing flexibility depending on access and the size of the job.
• Good coverage: Coverage of about 250-300 sq ft per gallon means a quart covers touch-up and smaller areas with solid hide and opacity.
• Primer guidance included: Metals should be primed with TotalProtect and wood can be primed with TotalBoat Topside Primer for best adhesion and longevity.

Who It's For

Boat owners and maintenance professionals who need a durable, waterproof coating for bilges, engine rooms, lazarettes and lockers will find this product useful; it is especially suitable where fuel, oil and solvent exposure are likely and a glossy surface aids inspection and cleaning. DIYers who already have basic surface preparation skills and prefer flexible application methods will appreciate the product.

Those looking for an anti-fouling hull paint or a decorative topside system should look elsewhere, since this formula is intended for enclosed bilge and locker areas rather than external underwater or high-UV exposed surfaces.

Pros & Cons

Pros

• Durable, waterproof finish that resists oils, solvents and acids.
• Easy to apply by brush, roll or spray and provides a smooth glossy surface.
• Good coverage for touch-ups and localized bilge work.
• Surface stays easier to keep clean from grease and grime.

Cons

• Can vary in thickness and cure time; some users report it dries quickly while others note a longer cure, so allow adequate time before heavy use.

Specifications

Brand	TotalBoat
Product	Epoxy-based bilge paint (TotalBilge)
Color	Gray (quart shown)
Volume	32 Fl Oz (1 quart)
Coverage	Approximately 250-300 sq ft per gallon
Application	Brush, roll or spray (thin with specified thinners)
Recommended primers	TotalProtect for metal; Topside Primer for wood; optional on fiberglass

Our Verdict

The TotalBilge epoxy bilge paint is a practical, value-driven choice for anyone needing a hard, chemical-resistant finish in bilges and confined engine spaces; its flexibility in application and strong protection against oil and solvent staining make it a good investment for routine maintenance and repairs.

Frequently Asked Questions

Can it be applied to bare metal?
Yes; prepared metal should be primed with TotalProtect as recommended for best adhesion and corrosion protection.

Is it easy to clean once cured?
Yes; the glossy, hard finish wipes clean of grease and grime and resists lifting or staining from oils and solvents.

Will one coat provide full coverage?
Many users report excellent coverage with one coat, but application method and surface porosity may require a second coat for complete hide.