Trailer Gate Lift Assist Upgrade - 2-Sided Tailgate Lift Kit

In this review the Trailer Gate Lift Assist Upgrade is evaluated as a practical, budget-friendly way to make heavy trailer tailgates and ramps easy to lift. The kit is aimed at owners of open utility trailers who want a hands-free solution that reduces strain; its single biggest selling point is the pair of spring/cable assemblies combined with durable aluminum rollers that make the gate feel almost weightless after installation. Installation takes about 30 minutes and the system is designed to work with common trailer dimensions, making it a straightforward upgrade for DIYers.

Key Features

• Easy to Install: The complete 2-sided kit arrives with mounting bolts and hardware so the system can be fitted in roughly 30 minutes with common tools.
• Upgraded Aluminum Rollers: Replaces fragile plastic rollers with 100% aluminum alloy rollers that are wear-resistant and last longer under repeated use.
• Hands Free Operation: The spring and cable assemblies let a single person lift and lower a tailgate or ramp with one hand, reducing strain on the back.
• Wide Fit Range: Designed for trailers with side rails about 12 to 24 in above the bed and tailgates or ramps 4 to 6 ft tall, covering most common utility trailer setups.
• Safety Enclosed Design: The lift mechanism is fully enclosed to reduce pinch points and keep moving parts protected during use.
• Long Warranty: A 60-month warranty supports confidence in the build and addresses failures or defects over an extended period.

Who It's For

This kit is best for owners of open utility trailers who frequently lift heavy tailgates or ramps and want a durable, easy retrofit that saves effort and reduces injury risk. It suits DIY installers who can follow the provided hardware layout and have trailers with side rails in the 12 to 24 in range and gates 4 to 6 ft in height.

It is less appropriate for trailers with side rails lower than 10 in or custom gate assemblies outside the specified height and weight limits, and any user whose tailgate weight exceeds the stated maximum should seek a heavier-duty or professionally matched solution.

Pros & Cons

Pros

• Easy installation with full mounting hardware included, typically done in 30 minutes.
• Aluminum alloy rollers improve durability versus plastic rollers and extend service life.
• Makes lifting and lowering a tailgate a one-handed, near weightless action for most users.

Cons

• Some customers reported issues with instruction clarity and occasional missing hardware, so check the parts list before installation.

Specifications

Compatibility	Open utility trailers with side rails 10 to 24 in above bed
Tailgate/Ramp Height	4 to 6 ft
Maximum Gate Weight	Up to 400 pounds
Material (rollers)	100% aluminum alloy rollers
Included Hardware	Bolts, washers, lock nuts, clevis pins, S-hooks and two spring/cable assemblies
Warranty	60 months

Our Verdict

The Trailer Gate Lift Assist Upgrade is a practical, cost-effective retrofit for most open utility trailers that need easier gate handling. With robust aluminum rollers, a complete hardware pack, and a long warranty, it delivers clear value for DIYers who meet the fit parameters and want to protect their back and improve daily usability.

Frequently Asked Questions

Will this fit my trailer?
It fits trailers with side rails around 10 to 24 in above the bed and tailgates or ramps 4 to 6 ft tall; do not exceed the 400 pound gate weight limit.

How hard is installation?
Most users complete installation in about 30 minutes using common hand tools; verify all included bolts and pins before starting.

What if a part fails?
The kit ships with a 60-month warranty; contact the seller if assemblies crack, fail, or parts are missing for support or replacement.