Trailer Tailgate Lift Assist Kit for Open Utility Trailers - Easier

In this review of the Trailer Tailgate Lift Assist Kit the bottom line is simple: it is for trailer owners who regularly lift a 4 ft to 6 ft tailgate and want to dramatically reduce strain. The kit delivers a clear mechanical advantage by using a two-sided assist system that evens out forces on the ramp, so users report the gate can be lifted almost weightless by hand. Installation requires drilling, but the package includes wire rope, mounting hardware and instructions, making it a practical retrofit for most open utility trailers with 12 in to 24 in side rails.

Key Features

• Two-sided assist: Balances forces on both sides of the tailgate to prevent uneven stresses and reduce wear on the ramp and trailer over time.
• Wide compatibility: Designed to fit most open utility trailers with 12 in to 24 in side rails and tailgates or ramps 4 ft to 6 ft tall, so it covers common trailer sizes.
• Practical lifting aid: With the assist installed the tailgate can be lifted by hand, substantially reducing back strain and making loading easier.
• Durable construction: Steel components with a powder-coat finish resist corrosion and stand up to regular use on outdoor trailers.
• Included hardware and rope: The kit ships with 59.06 in of wirerope, mounting hardware and printed installation instructions to simplify setup.

Who It's For

This kit is best for DIY-minded owners of open utility trailers who want a straightforward retrofit to reduce the effort required to lift a tailgate or ramp. It suits landscapers, weekend haulers and anyone who frequently loads gear and wants to protect their back and the gate mechanism.

It is not the best choice for owners who cannot drill into their trailer frame or who need a custom-fit hydraulic solution; also users with side rails outside the 12 in to 24 in range should look for alternatives or a custom install.

Pros & Cons

Pros

• Reduces lifting effort noticeably, often allowing fingertip operation once installed.
• Two-sided design prevents uneven wear and helps extend the tailgate's service life.
• Solid steel build with powder-coat finish adds durability for outdoor use.
• Clear installation instructions and included wire rope and hardware speed up setup.

Cons

• Installation requires drilling, which may deter users who prefer bolt-on only solutions.
• Some customers report the supplied bolts were slightly short, so longer fasteners may be needed for certain frames.

Specifications

Compatibility	Open utility trailers with 12 in to 24 in side rails
Tailgate / Ramp Height	4 ft to 6 ft
Load Capacity	300 lbs
Material	Steel
Finish	Powder-coat
Included Items	Installation instructions, 59.06 in wirerope, mounting hardware

Our Verdict

The Trailer Tailgate Lift Assist Kit is a practical, cost-effective upgrade for most open utility trailers with 12 in to 24 in side rails and 4 ft to 6 ft gates. It eases lifting, protects the gate from uneven stress and is built to last, though installers should be prepared to drill and possibly substitute longer bolts if needed. For anyone who wants to save their back and extend gate life, it represents good value.

Frequently Asked Questions

Will this kit fit my trailer?
It fits trailers with side rails between 12 in and 24 in and tailgates or ramps 4 ft to 6 ft tall; confirm your rail height before buying.

Is drilling required?
Yes, drilling is required for installation and the kit includes instructions and hardware to guide the process.

Does the kit make the tailgate weightless?
Installed correctly the two-sided assist significantly reduces perceived weight and often allows the gate to be lifted by hand easily, but it is not motorized.