TRUECABLE RG6 Outdoor Dual Shield Coaxial Cable, 1000ft - Direct

In this review the TRUECABLE RG6 outdoor dual shield coaxial cable is evaluated for installers and homeowners who need a long, reliable run for TV, satellite, or broadband. The bottom line: it is a practical choice when a 1000ft spool, solid bare copper conductor, and direct burial rating are the most important factors. The review focuses on real-world handling, signal performance up to 3GHz, and durability for outdoor use, so readers can decide if this bulk cable fits their long-distance or underground runs.

Key Features

• Dual Shielding: The 60% aluminum braid plus 100% foil shielding reduces interference and maintains a cleaner signal for TV, satellite, and digital video up to 3GHz.
• Solid Copper Conductor: The 18 AWG bare copper center conductor improves conductivity and supports satellite installations that require reliable voltage to the LNB.
• Direct Burial Jacket: The weather-resistant polyethylene jacket is designed to resist sunlight, moisture, dirt, and snow so the cable can be buried or run in conduit.
• Pre-spooled Reel: The 1000ft cable comes on an EZ pull reel with sequential footage marks every 2 ft to simplify measurement and reduce tangles during long pulls.
• High-Frequency Sweep Tested: Sweep tested to 3GHz and ANSI/TIA certification provide measurable assurance for use with HDTV, SDI, and modem signals.

Who It's For

This cable suits professional installers, satellite technicians, and DIYers who need a long continuous run with minimal joins, especially for outdoor or underground installations where direct burial and UV resistance matter. It is also appropriate for multi-room coax distribution and backbone runs for broadband modems and TV systems.

Those who should look elsewhere include buyers who need factory-terminated leads, short patch cords, or ultra-flexible indoor coax for tight bends; this product is a bulk 1000ft spool and best for long straight runs or conduit-fed installations.

Pros & Cons

Pros

• Durable PE jacket and direct burial rating make it suitable for outdoor and underground installations.
• Solid 18 AWG bare copper conductor offers better conductivity and voltage delivery compared with copper-clad alternatives.
• Dual shielding and 3GHz sweep testing deliver reliable high-frequency performance for HDTV, SDI, and satellite signals.
• Pre-spooled reel and sequential footage markings simplify long pulls and installation planning.

Cons

• As a bulk 1000ft spool, it requires field termination and is not ready-made with connectors out of the box.
• Some users report mixed impressions of shielding handling during termination, so careful connector installation is needed.

Specifications

Length	1000 ft
Cable Type	RG6 dual shield coaxial
Conductor	18 AWG solid bare copper
Impedance	75 Ohm
Jacket	UV resistant polyethylene, direct burial (CMX)
Shielding	60% aluminum braid + 100% foil
Frequency Test	Sweep tested to 3 GHz

Our Verdict

The TRUECABLE RG6 1000ft bulk spool is a strong value for anyone needing long outdoor runs with dependable signal quality and direct burial capability. Its solid bare copper conductor and robust dual shielding make it a sensible choice for satellite and high-frequency video distribution, provided the installer is prepared to terminate connectors in the field.

Frequently Asked Questions

Can this cable be buried directly in the ground?
Yes. The PE jacket is rated for direct burial and resists UV, moisture, and dirt for below-ground installations.

Is the conductor solid copper or copper-clad?
The cable uses an 18 AWG solid bare copper conductor, which performs better for voltage delivery to satellite LNBs than copper-clad steel.

Does it come with connectors installed?
No. This is a bulk 1000 ft spool intended for field termination; connectors must be installed on-site.