Underhoist Support Stand 3/4 Ton Capacity - Stable Vehicle Support

Our review of the Underhoist Support Stand finds it best suited for home mechanics and small shop technicians who need a compact, dependable means to support vehicle components during repair. The stand's single biggest advantage is its combination of a high 1653.5 lb capacity and a long 38.4 in to 75.4 in lifting range, which makes it practical for positioning transmissions, exhaust sections, and other components while working beneath a vehicle. It is a straightforward, toolroom-oriented support rather than a primary lifting device.

Key Features

• 1653.5 lb Capacity: The 3/4 ton rated capacity gives confident partial support for transmissions, drive shafts, and radiators without excessive flex under load.
• Dual Height Adjustment: The main post holes combined with the threaded rod allow quick coarse positioning and fine tuning across a wide 38.4 in to 75.4 in range for varied clearance needs.
• Bearing Mounted Spin Handle: A thrust-bearing equipped handle makes raising and lowering smoother and easier even when supporting heavy components.
• Sturdy Base and Gussets: A 6 mm circular base and triangular 3 mm gussets increase stability to reduce wobble while working under the vehicle.
• U-Shaped Rubber Tray: The padded tray secures contact points without damaging parts and prevents slipping during installation or removal tasks.
• Portability: At about 25.4 lbs the wheeled stand is light enough to move around the shop but substantial enough to remain stable once set.

Who It's For

The stand is ideal for hobbyists, DIYers, and small-shop technicians who need a reliable secondary support to hold and position vehicle components while performing service tasks. It suits those working on small cars and light vehicles where two stands can share the load safely.

It is not a substitute for a primary lifting device or full vehicle support with four-post stability; users who require full vehicle hoisting or heavy commercial use should look for higher-capacity, dedicated lifting equipment instead.

Pros & Cons

Pros

• High 1653.5 lb load rating provides robust partial support for many repairs.
• Wide 38.4 in to 75.4 in range covers most under-vehicle clearance needs.
• Spin handle with thrust bearing eases adjustment under load.
• Rubber-padded U tray and reinforced base improve grip and stability.

Cons

• Requires at least two stands for safe use under a vehicle, so single-stand buyers must plan for an additional purchase.
• As a partial-support tool it should not be used as the only means to support a vehicle when full lift stability is required.

Specifications

Capacity	1653.5 lb (3/4 ton)
Weight	25.4 lb (11.5 kg)
Height Range	38.4 in - 75.4 in (975 - 1915 mm)
Base Thickness	0.2 in (6 mm) circular base
Gusset Thickness	0.1 in (3 mm) triangular gussets
Frame Material	Q235B steel tubular frame
Handle	Bearing mounted spin handle with rubber grip

Our Verdict

The Underhoist Support Stand is a practical, well-built tool for anyone who needs dependable, adjustable partial support when working on small cars. Its strong 1653.5 lb capacity, wide lift range, and bearing-mounted handle make positioning components easier and safer, and the reinforced base adds needed stability. For those needing a secondary support to assist with transmissions, exhausts, and similar jobs, it represents solid value provided two stands are used as intended.

Frequently Asked Questions

How many stands are needed to support a vehicle?
At least two stands are required to provide balanced partial support for most small cars; this product is not intended as a sole support for a full vehicle lift.

Can the height be adjusted under load?
Yes, the threaded screw and bearing-mounted spin handle allow fine adjustment and easier raising or lowering even under heavy component loads.

Will the rubber tray damage components?
The U-shaped tray has rubber padding to reduce slipping and protect contact points from damage during support and positioning tasks.