Weld on Tabs with 1/2 Hole for Shock Mounts - 20 Pcs Steel

Introducing our premium weld on shock mounts designed for durability and precision. Each tab features a perfectly sized design with a 1/2 inch hole, measuring 2-1/2 inches in height and 1-3/4 inches in width. The 1/4 inch thick tabs come with a 15 degree chamfer at the bottom, ensuring a snug fit that fills the gap during welding and guarantees a firm hold.

Our steel weld tabs are engineered with an anti-sway design, featuring a center hole that maintains a 0.1mm gap control. This is crucial for high vibration applications, such as engine mounts, where stability is paramount. The FEA-optimized edge thickness of 9.7mm significantly increases tear-out resistance by 150% compared to competitors.

Constructed from premium acid-washed steel, our shock mount plates undergo a rigorous pre-treatment process. This includes acid cleaning technology and tension leveling, ensuring the plate's flatness is maintained at <0.1mm/m warpage. Additionally, residual stress is reduced by 40% through stress-relief annealing at 650C, enhancing the overall performance of the tabs.

With a controlled hydrogen content below 2ppm, our weld tabs are almost entirely free from hydrogen-induced cracking, a common issue in untreated steel. Each tab is precision-controlled to HV130-150 hardness, striking the perfect balance between softness and strength. They can withstand shear loads of up to 18kN, which is equivalent to suspending a pickup truck from a single bracket.

Experience a zero-defect welding process with our weld on tabs. The laser-cleaned surfaces achieve near-zero porosity, with less than 0.5% compared to the industry average of 3-5%. This ensures that oil residue and oxide layers are eliminated, allowing for compatibility with all MIG/TIG processes using ER70S-6 wire. The zinc-free composition prevents toxic fume emissions, while the low-silicone formula reduces spatter by 30%.

These tabs are ideal for high-impact applications and critical joints, making them perfect for trailer hitches, suspension brackets, rock crawler roll cages, hydraulic press frames, or marine brackets. Our steels are treated with pickling technology, which delays rust up to three times longer than untreated steel in wet environments. For optimal protection, we recommend combining with a primer for up to 10 years of rust resistance.