wioboy Paint Spray Booth Intake Filter Pad 24in x 24in - Tacky Panel

Our review of the wioboy Paint Spray Booth Intake Filter Pad finds it best suited for small shops and hobbyists running crossdraft spray booths who need a practical, no-frills solution to keep airborne dirt out of the work area. The single biggest reason to buy is reliability: the combination of a self-sealing gasket and an internal wire frame prevents bypass and flutter, so the filter stays in place and traps contaminants without disrupting airflow. This review focuses on real workshop use, installation behavior, and whether the 24in x 24in tacky panels live up to expectations.

Key Features

• Self-sealing gasket: creates a snug seal around the intake to prevent dirty air from bypassing the filter and entering the booth.
• Internal wire frame: holds the panel flat under airflow so the media does not flutter and allow particulates through.
• Two-layer polyester media: provides a balance of low initial resistance and surface tack to capture dust and overspray effectively.
• Low initial resistance: helps maintain intake airflow and booth performance when freshly installed, reducing strain on fans.
• Tracky/tacky surface: holds dirt in place on the panel face so particulates are trapped rather than pushed deeper into the system.
• 20 per pack: a bulk 20-pack offers convenient replacement intervals for busy shops or repeated small projects.

Who It's For

The wioboy intake pads are aimed at auto body shops, woodworking finishers, and serious hobbyists using crossdraft spray booths who need an economical, effective intake filter. They are especially useful where maintaining steady intake flow and preventing flutter are important to consistent finishes.

Those who should look elsewhere include operators of downdraft or high-production multi-stage booth systems requiring HEPA-level filtration or specific MERV ratings; this product is a practical tacky intake panel, not a high-efficiency particle arrestor for cleanroom-level needs.

Pros & Cons

Pros

• Effective seal and wire frame reduce bypass and flutter, improving filter performance under typical booth airflow.
• Two layers of polyester media deliver low resistance while the tacky surface traps particulates on contact.
• Bulk 20-pack reduces the frequency of ordering and ensures a steady supply for regular maintenance.
• Simple drop-in panels are quick to install and replace during routine booth servicing.

Cons

• Not designed as a HEPA or specialty high-efficiency filter, so shops needing finer particulate removal must upgrade.
• The tacky surface will saturate over time and needs scheduled replacement to maintain effectiveness.

Specifications

Brand	wioboy
Product type	Paint booth intake filter pad
Dimensions	24in x 24in
Pack quantity	20 per case
Media	Two layers of 100% polyester
Features	Self-sealing gasket and internal wire frame

Our Verdict

The wioboy Paint Spray Booth Intake Filter Pad is a solid, cost-effective choice for crossdraft booths where preventing bypass and flutter matters. It gives reliable dirt capture with low initial resistance and the internal wire frame keeps the panel stable, making it good value for shops that replace intake panels regularly but do not need HEPA-level filtration.

Frequently Asked Questions

How often should these tacky panels be replaced?
Replacement depends on booth usage and how quickly the tacky surface fills with debris; most shops follow a scheduled change during routine maintenance or when visible saturation appears.

Will this product reduce intake airflow significantly?
No, the two-layer polyester media is designed for low initial resistance to preserve intake airflow while still capturing particulates.

Are these compatible with standard 24in filter frames?
Yes, the panels are 24in x 24in and include a self-sealing gasket and internal wire frame to fit standard crossdraft intake installations.