YENUO Heavy Duty Drawer Slides Full Extension 28 in - Smooth 100 lb

In this review the YENUO Heavy Duty Drawer Slides (28 in) are judged as a practical, budget-friendly option for cabinetry and utility drawers that need a high load capacity and full extension access. The key reason to consider them is their combination of a 100 lb rated load and a 3-fold full extension design, which lets the drawer be pulled out completely for full access while supporting heavy items. Installation requires attention to cabinet clearances and parallel alignment, but once fitted these rails deliver a smooth, stable glide for demanding uses.

Key Features

• Maximum load capacity: The slides are rated to carry up to 100 lb, keeping heavy tools and supplies supported without bending under normal use.
• 3-fold full extension: The three-section design allows the drawer to be fully extended so the entire drawer contents are accessible from the front.
• Durable construction: Made from 1.5mm high-tension cold-rolled steel plates for long-term rigidity and resistance to deformation under load.
• Quiet, smooth operation: Dual industrial-grade ball bearings and a rubber crash pad reduce noise and provide a consistent, low-friction slide.
• Galvanized finish: A blue galvanized sealing surface improves anti-rust and oxidation resistance for longer service life in workshop and cabinet environments.
• Detachable action: A plastic buckle lets the narrowest third track separate for easier drawer installation and removal.

Who It's For

This model is well suited to homeowners, woodworkers, RV or truck fitters and light industrial users who need a robust side-mount slide that supports heavy loads and offers full access to drawer contents. It is especially useful where heavy tools, parts, or supplies are stored and quick full-extension access is required.

Those who should look elsewhere include people who cannot meet the clearance requirements (the cabinet must provide 0.5 in clearance per side) or shoppers who expect included mounting screws and printed instructions; these slides ship without screws and assume some installation experience and hardware selection (use M4 screws appropriate to your cabinets).

Pros & Cons

Pros

• Strong 100 lb capacity from thick cold-rolled steel keeps drawers stable under heavy loads.
• Full extension three-section design gives complete access to drawer contents.
• Smooth, quiet operation thanks to dual bearings and a rubber crash pad.
• Good corrosion resistance from the galvanized blue sealing surface.

Cons

• No mounting screws or printed instructions included, so you must source M4 screws and be comfortable aligning the slides precisely during installation.

Specifications

Product type	Side mount drawer slides
Length	28 in (suitable for 28-30 in drawers)
Extension	3-fold full extension (fully extended length 56 in)
Load capacity	100 lb
Material	1.5 mm high-tension cold-rolled steel
Finish	Galvanized blue sealing surface
Mounting hardware	Not included (recommended M4 screws)

Our Verdict

The YENUO 28 in heavy duty drawer slides are a solid choice for anyone needing full-extension access and the ability to carry heavy loads without flex. They represent good value when the cabinet clearance requirements can be met and the buyer is prepared to supply appropriate M4 mounting screws and do a careful, parallel alignment during installation.

Frequently Asked Questions

Do these slides include mounting screws?
No. Mounting screws are not included; the manufacturer recommends using M4 screws suited to your cabinet and drawer materials.

What drawer width clearance is required?
Allow 0.5 in clearance on each side of the drawer (total 1 in between inside cabinet width and outside drawer width) for proper fit.

Can the drawer be removed easily?
Yes. A plastic buckle on the back releases the narrow third track so the drawer section can be detached for installation or removal.